1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
LR31
Intrinsically Safe Open Channel Pulse Radar Level Transmitter
Models In Stock
- Rugged IP68 level sensor enclosure with 304 SS mounting bracket
- Configuration via push button display or HART communicator
- 26 GHz. pulse radar is unaffected by sump process conditions
- Wall mounted display with windowed enclosure rated IP67
LR31
From
C$
3,062.90
Models In Stock
Product Overview
- Accuracy ± 3 mm
- Antenna Diameter 4.88 in
- Antenna Length 6.12 in
- Approvals CE, RoHS, FCC
- Approvals Note ATEX IIG Ex ia II C T6...T3 Ga IEC Ex ia IIC T6...T3 Ga CSA Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F & G; (T6... T3); Class I Zone 0 AEx ia IIC (T6... T3) Ga & Zone 20 AEx ia IIIC (T76°C to T146°C) Da; Ex ia IIC (T6...T3) Ga & Ex ia IIIC (T76°C to T146°C) Ga
- Bar Graph Percent of Span
- Beam Angle 12°
- Cable Length 32.8 ft
- Cable Type Insulated Shielded
- Configuration Push Button, HART 7
- Deadband 12 in
- Display and Indications Echo Signal Curve
- Display Measuring Units ft, m
- Display Type LCD
- Electrical Connection 1/2 in NPT
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP67, IP68, NEMA Type 6
- Flange Thickness 0.8 in
- Frequency 26 GHz
- Materials Polycarbonate, PVC
- Measuring Range, Min 1 ft
- Memory Non-Volatile
- Mounting Wall Mount
- Number of Wires 2
- Operating Pressure, Max 14.69 psi
- Power Consumption 22.5 mA
- Probe Type Antenna
- Process Connection Size 1 in
- Process Connection Type NPT Male
- Process Temperature, Max 100 °C
- Process Temperature, Min -40 °C
- Signal fail-safe 3.9 mA, 20.5 mA, 22 mA
- Signal invert 4 to 20 mA, 20 to 4 mA
- Storage Temperature, Max 80 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 21.6 to 26.4 Vdc
- Tank Type Open Channel, Sewer
- Temperature Compensation Automatic
The intrinsically safe 26 GHz. pulse radar transmitter provides continuous level measurement up to 98.4’ (30m) with a 4-20 mA analog and HART digital signal output, and is configured via its remote push button display module or HART communicator. The non-contact liquid level sensor is intended for industrial wastewater, municipal storm or sewer lift station, reservoir, river, canal or open channel applications located below or above grade. Select this sensor for challenging process conditions that may include light surface foam or agitation, small trash or plant material, wind, condensation or vapor. Each comes with a 32.8’ (10m) cable, mounting bracket and display module. The sensor is designed for bracket mount installation suspended above the liquid
Lift Stations
Industrial and municipal pump lift stations collect and transfer wastewater or stormwater into treatment. These receptacles are dynamic environments that contain dirt, grease, oil, agitation, sludge, foam, condensation, chemicals or vapor. The LR31 pulse radar sensor is unaffected by such challenging process conditions, and is designed for bracket mount installation, either downhole or above grade based on your needs.
Lift Stations
Industrial and municipal pump lift stations collect and transfer wastewater or stormwater into treatment. These receptacles are dynamic environments that contain dirt, grease, oil, agitation, sludge, foam, condensation, chemicals or vapor. The LR31 pulse radar sensor is unaffected by such challenging process conditions, and is designed for bracket mount installation, either downhole or above grade based on your needs.
Show Ratings & Reviews