Welcome to our new website, found an issue or bug? Please report it here
FPR206
Liquid Flow Transmitters With Visual Indication
Choose a Variant
Volumetric Flow Rate, Min
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.02 % |
| Cable Length | 10 m |
| Display Type | None |
| Electrical Connection | Cable |
| Electrical Output | 4 to 20 mA |
| Height | 2.63 in |
| Length | 3.7 in |
| Material Construction Option | No Visual Indicator |
| Materials | Stainless Steel, Epoxy, Nylon, PVC |
| Materials, Wetted | 316 SS, Acetal Copolymer, Buna-N (NBR), EPR, FKM, PEEK, Polycarbonate |
| Media Compatibility | Liquids |
| Operating Pressure, Max | 500 psi |
| Output Detail | Load Driving Capacity: 1150 Ω max |
| Output Signal | Current |
| Process Connection Size | 3/4 in |
| Process Connection Type | NPT Female |
| Repeatability Error | 0.005 |
| Response Time | 2 sec |
| Response Time Note | 2 s to 90% (step change in flow rate) |
| Supply Voltage | 12 to 35 Vdc |
| Switch Rating | 5 A @ 120/240 Vac |
| Type of Operation | Sensor Transmitter |
| Viscosity Range | 0 to 5 cPs |
| Volumetric Flow Rate, Max | 189.3 l/min |
| Volumetric Flow Rate, Min | 18.9 l/min |
| Width | 2.45 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 1 out of
5
by
wilson91 from
Design needs improvement
Have gone through 3 or 4 of these in under 2 years. After a very short period of use the wheel inside loosens up and gets caught up which slows the speed of it and gives an incorrect flow. This has happened on every one of these we have bought and it is clearly a poor design
Date published: 2020-07-20
Rated 1 out of
5
by
curtisr1 from
The worst
This is the most stupidly designed flowmeter ever. The wire harness is within about 1/16 inch of one of the water fitting. Virtually any water fitting I tried to put onto the flow meter body would not screw on because of interference witht he wiring harness. I just took vise grips and removed the wiring harness and when I removed it all the wires inside inside were sheared off. Dead as a doornail just like that.
Date published: 2019-01-30
Rated 5 out of
5
by
Zach Sedahl from
Easy & Convenient
Transmitter can work in countless industries and has high accuracy.
Date published: 2024-10-30