1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
LDi-119
LVIT Linear Position Sensors with Rod Ends
Models In Stock
LDi-119
From
C$
720.92
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 4 out of
5
by
DAV 49 from
Great Product but suggest some improvements
I installed this on linkage to provide stable position feedback to control a drive motor. It worked great. I would suggest making the connection points a little larger.
This unit will take a 10-32 screw. I would have preferred a 1/4-20.
Also I note the cable length in the description.
I bought a 100mm unit with 4-20 ma signal
Date published: 2018-05-07
How wide does the clevis jaw need to be to interface with these? The drawing shows a 5mm ID on the rod end, but a width is not specified.
The width of the rod ends used on the LDI-119 Series are 0.31". The tolerance of this dimension is +/- 0.005"
Date published: 2024-11-16
Hi, Is one end fixed, and the other moves freely?
This LDI-119-025-A010A is 0 to 25mm with an output of 0 to 10VDC, one direction armature moves only from 0 to positive direction.
Date published: 2023-10-26
Can I extend the cable on these?
Yes, You can extend the cable using a 4 conductor shielded cable. we offer this type of cable in 100' spools. Part# TX4-100
Date published: 2022-01-25
What standard lengths are available for the cable, and an estimate for each length, please? Do you make sensors with customized cable lengths?
Thank you for your inquiry, the LDI series only comes with a 1 M cable. Unfortunately we are not able to customize the cable length on this sensor. You can extend the cable using a 4 conductor shielded cable. we offer this type of cable in 100' spools. Part# TX4-100
Date published: 2022-05-16
Are Solid Models (.STEP) available? Specifically Item# LDI-119-150-A020A
There are no STEP models available for these sensors
Date published: 2023-09-08
Will the these sensors work a strong DC magnetic filed?
Thank you for your question?
The units would be effected by the magnetic-field. The amount of disruption we are unable to tell?
Hope this was helpful?
Date published: 2019-07-03
For the LDI-119-025-A010A (25mm) can you position the arm in a mid stroke position (i.e. 1/2" travel), set that position as zero, and then read the travel in each direction with 1/2" of travel available in each direction?
Mike, The LDI-119 series is not a bipolar device, so you will not be able to set the zero at 1/2 stroke. Typically for these devices, you will read 10 volts when it is fully retracted and 0 volts when fully extended.
Date published: 2024-01-11
Is the output convertible to "plug and play" USB for a desktop?
Thanks for your question. The LDI-119 are only available with an analog output of either 0-10 Vdc or 4-20 mAdc. We do not offer a "plug and play" USB converter for this. You could connect it to a computer using a USB data acquisition system but there would be some initial setup required. A good option for this would be the INET-600 USB Data Acquisition System with an INET-510 screw terminal box. Free software is included. You would also need a 24 Vdc power supply for the sensor. The PSR-24L would be suitable and could power multiple sensors if needed. Our Tech Support engineer has also emailed you if you have any further questions.
Date published: 2019-06-04