Welcome to our new website, found an issue or bug? Please report it here
LCM101-50
50 kgf, ± 0.03%, Linearity, 3 mV/V Output, Cable
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$785.12 |
| 10-24 | C$745.86 |
| 25-49 | C$730.16 |
| 50-99 | C$698.76 |
| 100+ | C$683.05 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Cable Length | 30 ft |
| Calibration Option | 5 POINT NIST |
| Electrical Connection | Cable |
| Electrical Output | 3 mV/V |
| End Rod | MREC-M6M |
| Force Type | Compression, Tension |
| Full Scale Deflection | 0.02 in |
| Height | 38 mm |
| Hysteresis | ± 0.02% |
| Input Resistance | 350 ± 10 Ω |
| Interchangeability | 0.0025 |
| Length | 64 mm |
| Linearity | ± 0.03% |
| Load Button | MLBC-M6 |
| Load Cell Capacity | 50 kgf |
| Load Cell Type | S-beam |
| Materials | 17-4 PH Stainless Steel |
| Operating Temperature, Max | 93 °C |
| Operating Temperature, Min | -40 °C |
| Output Resistance | 350 ± 10 Ω |
| Overload, Max | 300% FS |
| Process Temperature, Max | 71 °C |
| Process Temperature, Min | 17 °C |
| Repeatability | ± 0.01% |
| Safe Overload | 150% FS |
| Supply Power Note | 10 Vdc, 15 Vdc maximum |
| Supply Voltage | 10 Vdc |
| Thermal Span Effect | 0.0018% FSO/°C |
| Thermal Zero Effect | 0.0018% FSO/°C |
| Weight | 0.45 kg |
| Width | 13 mm |
| Wire Gauge | 24 AWG |
| Wiring/Connector Table | Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input |
| Zero/Balance Error | ± 1% |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Tim H from
good value load cells
I have 3 of these now (different capacities) . the price is reasonable, Omega is a trusted source and the service and support is very good. Make sure to buy the combined tension-compression for the best usefulness. For power and display I use the Digital Panel meter from Automation direct (yes a competitor) but Omega has a similar unit. Buy extra connectors at Newark and the load cells are plug and play (just change the settings on the display). I would give a 5 star but the spot welded covers for the strain gauge are poor in that they can bend and open up. I tie wrap them shut to prevent any issues. The hardware (buttons and rod ends) are useful but a bit pricey.
Date published: 2020-04-19