1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
Alta-AC-Current
Monnit Alta Wireless 20 and 150 Amp AC Current Meters
Models In Stock
- For Measuring AC Current to 20 or 150 Amps, Depending on Model
- Extended Non-Line-of-Sight Range (1,200 Ft Through 12-14 Walls Typical)
- AES-128 CBC Data Encryption
- Local Storage of 512 Messages for Data Assurance
Alta-AC-Current
From
C$
265.32
Models In Stock
Product Overview
- Accuracy ± 2 %
- Battery Size and Type Alkaline AA
- Cable Length 3 ft
- Data Interface Wireless
- Electrical Connection Cable
- Frequency 50 to 100 Hz
- Measurement Type Process Current
- Memory Upto 512 sensor messages
- Number of Channels 1
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Power Consumption 22.6 mA
- Power Consumption Note Sleep Mode:0.2 µA, RTC Mode:0.7 µA, MCU Idle:570 µa, MCU Active:2.5 mA, Radio RX Mode:5.5 mA, Radio TX Mode:22.6 mA
- Supply Power Note DC: 2.0 - 3.8 VDC (3.0 - 3.8 VDC using power supply), Solar panel: 5VDC/30mA (53mm x 30mm), Charging temperature range: 0°C to 45°C (32°F to 113°F), Max temperature range: -20°C to 60°C (-4°F to 140°F), Included rechargeable battery: 600 mAh/>2000 charge cycles (80% of initial capacity), Solar efficiency: Optimized for high and low-light operation
- Supply Power Type DC/Battery
- Use With Sensor Type Clamp-On Transformer
ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. For AC Current only; do not use with DC current. The general purpose AA model should only be operated in dry, low humidity environments. Should you need a sensor that operates at extreme temperatures and can withstand getting wet or condensed on, please consider the IP65 NEMA 4X model.
Features of All ALTA Series Sensors
Features of All ALTA Series Sensors
- Frequency Hopping Spread Spectrum (FHSS).
- Improved interference immunity.
- Improved power management for longer battery life (8-10 years).
- Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages).
- Over-the-air updates (future proof).
- Available in 915 MHz for USA Canada or 868 MHz for Europe
- Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email.
PDFs & Manuals
