Welcome to our new website, found an issue or bug? Please report it here
FTB370-Series
Brass Turbine Flow Meter for Water
Models In Stock
- Compact Design
- Wide Turn Down Ratio
- High Quality Sapphire Bearing
- Fixed Pulse Rate
FTB370-Series
From
C$
868.13
Models In Stock
Product Overview
- Accuracy ± 3 %
- Cable Length 1.5 m
- Electrical Output Amplified Square Wave
- Enclosure Ratings IP54, NEMA Type 3
- Height 58 in
- Materials, Wetted Nickel Silver Alloy, CW602N, Noral, Noral, Noryl, Polypropylene, Recona28 Nickel-plated, Sapphire
- Media Compatibility Liquids
- Operating Temperature, Max 85 °C
- Output Signal DC Pulse
- Process Connection Type NPT Male
- Repeatability ±0.5%
- Width 1.5 in
The FTB370 Series flow turbines are designed for flow rate measurement of water and many water based liquids. They are compact in design and have a wide measuring range. The liquid flowing into the FTB370 series is divided by guiding blades into four split streams. The uniform loading of the bearings from four sides causes the forces to cancel themselves out and wear gets reduced to a minimum. The extremely hard bearing materials also ensure an extraordinary life expectancy.
SPECIFICATIONS
Accuracy: ± 3% of reading
Repeatability: ± 0.5%
Output: NPN open collector (hall effect)
K-Factor [Pulses/Liter (Pulses/Gallon)]:
FTB371: 869 (3289)
FTB372: 68 (258)
FTB373: 27 (102)
Maximum Temperature: 85°C (185°F) [at 0.689 bar (10 psi)]
Maximum Pressure: 9.997 bar (145 psi) [at 29.4°C (85°F)]
Power Supply: 5 to 24 Vdc (20 mA max)
Cable: 1.5 m (5') [maximum temperature 70°C (158°F)]
Protection: NEMA-3 (IP54)
Maximum Particle Size: 0.508 mm (0.02")
Wetted Materials
Brass Body: CuZn36Pb2 As CW602N
Sensor Housing: Polypropylene Noryl
Magnets: Recona 28 nickel-plated
Rotor: PEI ULTEM
O-Ring: NBR
Bearings: Sapphire
Shaft:
FTB371: Arcap AP1D
FTB372: 316SS
FTB373: 316SS
SPECIFICATIONS
Accuracy: ± 3% of reading
Repeatability: ± 0.5%
Output: NPN open collector (hall effect)
K-Factor [Pulses/Liter (Pulses/Gallon)]:
FTB371: 869 (3289)
FTB372: 68 (258)
FTB373: 27 (102)
Maximum Temperature: 85°C (185°F) [at 0.689 bar (10 psi)]
Maximum Pressure: 9.997 bar (145 psi) [at 29.4°C (85°F)]
Power Supply: 5 to 24 Vdc (20 mA max)
Cable: 1.5 m (5') [maximum temperature 70°C (158°F)]
Protection: NEMA-3 (IP54)
Maximum Particle Size: 0.508 mm (0.02")
Wetted Materials
Brass Body: CuZn36Pb2 As CW602N
Sensor Housing: Polypropylene Noryl
Magnets: Recona 28 nickel-plated
Rotor: PEI ULTEM
O-Ring: NBR
Bearings: Sapphire
Shaft:
FTB371: Arcap AP1D
FTB372: 316SS
FTB373: 316SS
| Model No. | Length mm (in) | Diameter mm (in) | Height mm (in) | Fittings | Range LPM (GPM) | K-Factor PPL (PPG) | Pressure Drop Bar (psi) |
|---|---|---|---|---|---|---|---|
| FTB371 | 89 (3.5) | 38 (1.5) | 58 (2.3) | 3/4 NPT | 1.9 to 39.4 (0.5 to 10.4) | 869 (3289) | 2.2 (32) |
| FTB372 | 203 (8.0) | 51 (2.0) | 89 (3.5) | 1 NPT | 4.2 to 158 (1.1 to 41.6) | 68 (258) | 0.45 (6.5) |
| FTB373 | 292 (11.5) | 76 (3.0) | 89 (3.5) | 1½ NPT | 50 to 416 (13.2 to 110) | 27 (102) | 1.8 (26) |
PDFs & Manuals
Show Ratings & Reviews
Does Omega have a compatible display with units of flow (l/min, g/min)? The DFP78 meter only displays temperature.
Thank you for your inquiry. The DPF78 meter will display flow rate and is compatible with the amplified square wave from the turbine flow meter.
Date published: 2024-05-21
Do you need any straight length up and/or downstream of this flow meter?
Thank you for your inquiry. It is always recommended to have straight run piping upstream and downstream to have a Laminar profile passing thru the flow meter and to avoid any turbulence. It is 10x pipe diameter Up and 5x pipe diameters Down.
Date published: 2024-09-05
What display/readout is recommended for use with the FTB371 model?
Thank you for your inquiry. A compatible remote display that will accept the signal input is DFP78 meter
Date published: 2024-05-17