Welcome to our new website, found an issue or bug? Please report it here
LVF-200A-R-Series
Submersible Optical Switch for Level or Leak Detection
- Pulsed, Infrared Light Excitation (Leak Detection Solution)
- SPST Relay Standard
- Impervious to Most Ambient Light Conditions
- Mounted any Orientation, Wet or Dry
LVF-200A-R-Series
From
C$
347.88
Product Overview
- Accuracy ± 0.04 inH2O
- Approvals CE, RoHS
- Cable Length 1000 ft
- Enclosure Ratings IP68, NEMA Type 6
- Insulation PVC
- Loop Resistance 600 Ω @ 24 Vdc
- Media Compatibility Oil, Solvents, Water
- Number of Wires 4
- Operating Pressure, Max 150 psi
- Operating Pressure Note 150 psi @ 25°C (76°F), derated @ 1.667 psi per °C above 25°C (76°F)
- Operating Temperature, Max 90 °C
- Operating Temperature, Min -40 °C
- Process Connection Size 3/4 in
- Process Connection Type NPT Male
- Repeatability ± 0.02 inH2O
- Supply Power Type DC
- Supply Voltage 12 to 36 Vdc
- Switch Operation Selectable Normally Open or Normally Closed
- Switch Rating 1 A @ 60 or 120 Vac/Vdc
- Switch Type SPST
The LVF-200A-R Series optic sensor creates a pulsed beam of infrared light which is reflected on the oblique flat sensor tip. If the tip is dry, the light beam is recognized and if it is wet, the beam reflects back into the liquid. The optic sensor is factory calibrated for use with clear or translucent liquids. The shape and optic characteristics of the oblique flat optical surface provide a high level of optical efficiency, including resistance to ambient light and process condensation. Although the sensor offers very broad liquid compatibility, it is not recommended for use with coating or highly specular liquids. Ideal for leak detection.
Specifications
Accuracy: ± 1 mm (0.04") in water
Repeatability: ± 0.5 mm (0.02") in water
Operating Principle: Pulsed, infrared light beam
Voltage Input: 12 to 36 Vdc @25 mA
Relay: 60 VA, 1 A maximum
Switch Mode: Selectable, SPST, NO or NC states
Wetted Materials: Polypropylene (PP) or Perfluoroalkoxy (PFA)
Loop Resistance: 600 ? @ 24 Vdc
Maximum Pressure Rating PP: 150 psi @ 25°C (76°F) derated @ 1.667 psi per °C above 25°C (76°F)
Maximum Temperature Rating: -40 to 90°C (-40 to 194°F)
Enclosure Rating: NEMA 6 (IP68) submersible sensor and cable
Cable Length: 3 m (10') 4 conductor shielded
Max. Cable Length: 305 m (1000')
Dimensions: 7.6 or 11.4 L x 2.7 cm Dia (3.0 or 4.5 x 1.05") ¾ NPT or ¾ G
Specifications
Accuracy: ± 1 mm (0.04") in water
Repeatability: ± 0.5 mm (0.02") in water
Operating Principle: Pulsed, infrared light beam
Voltage Input: 12 to 36 Vdc @25 mA
Relay: 60 VA, 1 A maximum
Switch Mode: Selectable, SPST, NO or NC states
Wetted Materials: Polypropylene (PP) or Perfluoroalkoxy (PFA)
Loop Resistance: 600 ? @ 24 Vdc
Maximum Pressure Rating PP: 150 psi @ 25°C (76°F) derated @ 1.667 psi per °C above 25°C (76°F)
Maximum Temperature Rating: -40 to 90°C (-40 to 194°F)
Enclosure Rating: NEMA 6 (IP68) submersible sensor and cable
Cable Length: 3 m (10') 4 conductor shielded
Max. Cable Length: 305 m (1000')
Dimensions: 7.6 or 11.4 L x 2.7 cm Dia (3.0 or 4.5 x 1.05") ¾ NPT or ¾ G
PDFs & Manuals
Show Ratings & Reviews
Hi, I am faculty member of Mohawk college and we have some of this sensor but I don’t know how to generate or receive signal from this sensor. Does it need another module to generate infrared signal and converted to voltage or current? Thanks,
Thank you for your inquiry. This is a LVF-210A-R which is a level switch and only has relays, there is no signal output.
Date published: 2024-10-29