1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
P-Ultra-RTD
Ultra Precise RTD Sensors for Industrial Applications
Models In Stock
P-Ultra-RTD
From
C$
63.00
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 2 out of
5
by
Engineer8736 from
Not as accurate as indicated
Purchased 2 1/10 DIN RTDs and immediately sent them out for calibration. One is at the accuracy limit and the other is significantly outside the accuracy limit.
Date published: 2018-12-06
Rated 4 out of
5
by
li sev from
Good quality
Good quality. No complaints. Shipped in an acceptable amount of time.
Date published: 2023-12-18
What is the Pressure Rating for Part#: P-M-A-1/8-6-0-T-3?
Thank you for your inquiry Joeseph. Unfortunately, Part#: P-M-A-1/8-6-0-T-3 is not pressure rated.
Date published: 2022-12-22
What is the tolerance on the diameter of the probe? Specifically for the 3mm and 1/8 in varieties.
Thank you for your inquiry. The tolerance is ±0.001" for a 1/8" probe diameter.
Date published: 2022-03-21
What is the pressure rating for part number: P-M-A-1-8-3-1-4-T-3?
Hi Joseph,
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-10-31
what are the compliances? and certifications does these have. could not find the details here
Hi Mahesh,
This probe series does not include certification. NIST traceable certification is available as an option. Certification would follow standards described in following link;
https://www.omega.com/en-us/calibration-page
Best regards
OMEGA
Date published: 2023-04-06
what are the response times of these RTDs? I ordered a P-M-1/10-1/8-6-P-3
The response times for the P-M-1/10-1/8-6-P-3 are 0.9 seconds to get to 50% of response time in Water flowing at 3 feet per second and 7.5 seconds to 90% of the response.
Date published: 2021-11-02
how much self-heating error can once expect with 1mA excitation current with the 1/8" diameter probe? Conversely, what is the dissipation constant, E? Thanks.
Hi Moyar,
Thank you for the inquiry. Please forward these questions to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-07-29
Which is the distance from the tip to the thread, in the 150 mm version with the G 1/8'' BSPP? Also, how much of the probe must be immersed to have an accurate reading?
Hello and thank you for connecting with Omega Engineering!
The distance from tip of probe to beginning of threaded connection will be equal too the probe length, in this case 150mm.
In order to produce an accurate reading a minimum of 1" should be immersed in media.
Date published: 2022-03-24