Welcome to our new website, found an issue or bug? Please report it here
PSW-200
Industrial Hermetic Pressure Switch for Harsh Environments
- Rugged One-Piece Epoxy-Coated Aluminum Body
- Meets NEMA-4X Classifications
- UL Listed, cUL Certified
- Stainless Steel Nameplate
PSW-200
From
C$
896.95
Product Overview
- Approvals UL listed
- Control Output DPDT Relay
- Deadband 3.6 to 3.6 inH2O
- Deadband Type Fixed
- Electrical Connection Screw Terminal
- Enclosure Ratings IP66, NEMA Type 4X
- Operating Temperature Note setpoint typically shifts less than 1% of range for a 28°C (50°F) ambient temperature change
- Output Note 11 A 125/250 Vac resistive
- Output Value 11A @ 125/250/480 Vac
- Pressure Type Gauge
- Process Connection Type NPT Female
- Process Temperature, Min -23 °C
- Sensor Type Diaphragm
- Shock Setpoint repeats after 15 g, 10 ms duration
- Storage Temperature, Max 71 °C
- Storage Temperature, Min -54 °C
- Switch Single
- Switch Note Switch Output: Hermetically sealed SPDT or DPDT switch can be wired “normally open” or “normally closed”
- Switch Type DPDT
- Vibration Setpoint repeats after 2.5 g, 5 to 500 Hz
- Weight 6 lb
- Weight Note 0.7 to 2.7 kg (1.5 to 6 lb) (varies by model)
SPECIFICATIONS
Approvals:UL Listed, cUL Certified
Storage Temperature: -54 to 71°C (-65 to 160°F)
Ambient Temperature Limits: -40 to 71°C (-40 to 160°F), except Models PSW-234 to PSW-240, and PSW-221 to PSW-226: -18 to 71°C (0 to 160°F). Setpoint typically shifts less than 1% of range for a 28°C (50°F) ambient temperature change
Process Temperature:
Stainless steel: -57 to 204°C (-70 to 400°F)
Phosphor bronze: -40 to 149°C (-40 to 300°F)
Buna-N: -23 to 93°C (-10 to 200°F)
Shock: Setpoint repeats after 15 g, 10 ms duration
Vibration: Setpoint repeats after 2.5 g, 5 to 500 Hz
Enclosure Classification: Complies with NEMA-4X
Setpoint Repeatability: 1% of adjustable range, except models PSW-241 to PSW-245D, 1.5%
Switch Output: Hermetically sealed SPDT or DPDT
Electrical Output: 11 A, 125/250 Vac resistive
Enclosure: Die cast aluminum, epoxy coated, gasketed
Weight: 0.7 to 2.7 kg (1.5 to 6 lb) (varies by model)
Electrical Connection: 1/2 NPT and (2) 22 mm (7/8 in) diameter knockouts
Pressure Connection: 1/2 NPTF, or 1/4 NPTF as noted in 'To Order' table
Dimensions:
psi ranges: 214 max H x 101 W x 60 mm D (8.4 max 4 x 2.3')
inH2O ranges: W and D = 152 mm (6')
Approvals:UL Listed, cUL Certified
Storage Temperature: -54 to 71°C (-65 to 160°F)
Ambient Temperature Limits: -40 to 71°C (-40 to 160°F), except Models PSW-234 to PSW-240, and PSW-221 to PSW-226: -18 to 71°C (0 to 160°F). Setpoint typically shifts less than 1% of range for a 28°C (50°F) ambient temperature change
Process Temperature:
Stainless steel: -57 to 204°C (-70 to 400°F)
Phosphor bronze: -40 to 149°C (-40 to 300°F)
Buna-N: -23 to 93°C (-10 to 200°F)
Shock: Setpoint repeats after 15 g, 10 ms duration
Vibration: Setpoint repeats after 2.5 g, 5 to 500 Hz
Enclosure Classification: Complies with NEMA-4X
Setpoint Repeatability: 1% of adjustable range, except models PSW-241 to PSW-245D, 1.5%
Switch Output: Hermetically sealed SPDT or DPDT
Electrical Output: 11 A, 125/250 Vac resistive
Enclosure: Die cast aluminum, epoxy coated, gasketed
Weight: 0.7 to 2.7 kg (1.5 to 6 lb) (varies by model)
Electrical Connection: 1/2 NPT and (2) 22 mm (7/8 in) diameter knockouts
Pressure Connection: 1/2 NPTF, or 1/4 NPTF as noted in 'To Order' table
Dimensions:
psi ranges: 214 max H x 101 W x 60 mm D (8.4 max 4 x 2.3')
inH2O ranges: W and D = 152 mm (6')
PDFs & Manuals
Show Ratings & Reviews
Can this switch be set up with a manual reset or do you have a switch with this ability, I am looking for the switch to shut off power when pressure rises to 180 PSIG. The switch would be used in Anhydrous Ammonia service and located outdoors.
Thank you for your inquiry, The PSW-243 does not have the ability to do a manual reset, this unit is designed for harsh environments (Class I, Division 2).
Date published: 2022-01-18