Welcome to our new website, found an issue or bug? Please report it here
CSF060-Series
Touch-Safe Enclosure Heater with Thermostat 50 to 150W
Models In Stock
- Low Surface Temperature
- Integrated Thermostat
- Quick Mounting Due to DIN Clip
- Double Insulated (Plastic)
CSF060-Series
From
C$
143.08
Models In Stock
Product Overview
Touch-safe heater for the use in enclosures with electrical/electronic components. The design of the heater supports the natural convection which results in a high aircurrent of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. This model with plug-in thermostat does not require additional wiring. The heaters are designed for permanent operation. This heater is also available in a version without thermostat (CS 060).
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac* (min 110V, max 265V)
Heating Capacity: See table
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <80°C (176°F), except upper protective grille
Connection: 4-pole terminal 2.5 mm2, (0.10 in2) torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position: Vertical
Temperature
Operating: -40 to 70°C (-40 to 158°F)
Storage: -45 to 70°C (-49 to 158°F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE
Note: Other voltages on request
* Operating with voltages below 140 Vac/Vdc reduces heating performance by approximately 10%.
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac* (min 110V, max 265V)
Heating Capacity: See table
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <80°C (176°F), except upper protective grille
Connection: 4-pole terminal 2.5 mm2, (0.10 in2) torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position: Vertical
Temperature
Operating: -40 to 70°C (-40 to 158°F)
Storage: -45 to 70°C (-49 to 158°F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE
Note: Other voltages on request
* Operating with voltages below 140 Vac/Vdc reduces heating performance by approximately 10%.
Show Ratings & Reviews
Rated 1 out of
5
by
Laser123 from
Thermostat does not work, get a real heater.
I needed to keep an enclosure warm. I thought it would be great to get one with an integrated thermostat. Bad move. Lemon. Does not work. Tech support was unhelpful. I solved the issue by going to Home Depot and buying a real thermostat. Hooked it up and it worked great. All you need to do is close the circuit and it turns on.
For fun I placed the red thermostat it comes with in the freezer for an hour. It is supposed to switch at 59º F. I tested continuity and the pins are still open. Verified broken. Nice.
Bottom line don't trust it and order a better one.
Also I couldn't post this with Ad Blockers. Had to re-type. Kind of annoying...
Date published: 2023-03-31
Do you have a time chart that shows how long a CSF06001 50W heater takes to reach it's maximum temperature? We are trying to determine how long the heater will draw the inrush current of 2.5A.
Hi Monte,
Thank you for the inquiry. Please forward this request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-02-04
how does this heater work in a moist environment, it will never be submerged but it may get wet on the rare occurrence of a mechanical/plumbing issue in the brine maker.
Thank your inquiry. This item can work in a moisture environment.
Date published: 2022-08-23
Where can a person find a rechargeable heater that doesn’t need a cord?
Thank you for your inquiry. Omega only offers electrical heaters that operate on hard wired AC/DC voltage supplies. We do not offer battery operated rechargeable heaters.
Date published: 2020-12-16
RoHS 2015/863 - View Certificate
CE Approved
UL Recognized Component