Welcome to our new website, found an issue or bug? Please report it here
LD320
LVDT Linear Position Sensors with AC Output
Models In Stock
- Being replaced by the new LD320A Series
- 2.5 to 75 mm travel
- <0.2% Linearity
- Rugged 19 mm Dia. Stainless Steel Body
LD320
From
C$
630.30
Models In Stock
Product Overview
- Cable Length 2 m
- Cable Type PFA
- Core Material Nickel-iron
- Electrical Output AC
- Enclosure Ratings IP67
- Housing Material 300 Series Stainless Steel
- Operating Temperature, Max 120 °C
- Operating Temperature, Min -40 °C
- Shock Drop Testing: 1 m (3') onto hard surface;Topple Testing: 10 times each end onto hard surface
- Storage Temperature, Max 120 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 3 ± 1 Vrms, 5 ± 0.5 kHz
- Temperature Coefficient 0.015% of FS/°C
- Vibration 10 to 50 Hz: 1 to 10 g rms linear amplitude;50 Hz to 1 kHz: 10 g rms amplitude
- Zero/Balance Error <0.5% FSO
The LD320 series has been replaced by the new and improved LD320A series. Many ranges are in stock, available for immediate shipment.
The LD320 Series displacement sensors have a stainless steel body with improved IP67-rated sealing, coupled with new polymer guides with rigid carriers. These transducers are accurate and reliable, especially in wet and corrosive conditions. An unusually large bore-to-core clearance is maintained throughout the range, even on transducers fitted with on-board signal conditioning. This makes installation easier and helps prevent misalignment.SPECIFICATIONS
Linearity: <0.2% FSO
Residual Voltage at Null Position: <0.5% FSO
Storage Temp: -40 to 120°C (-40 to 248°F)
Operating Temp: -40 to 120°C (-40 to 248°F)
Protection Rating: IP67
Vibration (Sinusoidal Frequency):
10 to 50 Hz: 1 to 10 g rms linear
50 Hz to 1 kHz: 10 g rms linear
Shock:
Drop Testing: 1 m (3') onto hard surface
Topple Testing: 10 times each end onto hard surface
Case Material: 300 SS
Cable: PFA, 2 m (6') long
Core Material: Nickel-Iron
Show Ratings & Reviews
Rated 4 out of
5
by
Senior Buyer from
Stress Free Orders
Our company orders transducers from Omega. The order confirmations are prompt and the shipping labels contain all the necessary information for identification of parts that were shipped. Ordering items from Omega is very stress free.
Date published: 2021-12-30
Regarding LD320-100 is there a spec. for the number of turns or transformation ratio at full scale? Empirically I measured 2.132Vrms when my excitation signal is 3Vrms at 5kHz. But is this spec indicated anywhere?
There is no documentation indicating this specification. Please send your question to email pressure@omega.com. We would then be able to research your question and respond to you directly with an answer.
Date published: 2022-03-23
What is the resolution?
Jackie,
We don’t spec resolution for this transducer. It is dependent on the electronics that you are using to read the output, for example a digital display that reads to three decimal places.
Feel free to contact us if you have any further questions!
Date published: 2020-01-10
One end clearly has a male M6 thread. What is on the other end? Looks like a rounded off square boss. Is there a thread?
The end of sensor where the cable exits the unit has a threaded plug that can be removed and replaced with a rod end from the LD-UJOINT-KIT. The thread at that end is a M6 female thread.
Date published: 2023-04-27