Welcome to our new website, found an issue or bug? Please report it here
OM-CP-RFRTDTEMP2000A
Choose a Variant
Sensor Type
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$572.04 |
| 5-9 | C$543.44 |
| 10-24 | C$532.00 |
| 25-49 | C$509.12 |
| 50-99 | C$497.67 |
| 100+ | C$486.23 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Alarm Note | Programmable high and low limits; alarm is activated when temperature reaches or exceeds set limits, Alarm Delay: A cumulative alarm delay may be set in which the device will activate the alarm (via LED) only when the device has recorded a user specified time duration of dataAudible Alarm Functionality: 1 beep per second for reading alarm above/below threshold |
| Band Frequency | 2.405 to 2.475 GHz |
| Band Frequency Note | ISM band 2.405 to 2.475 GHz operation (channels 11 through 25) @ 250 kbps data rate |
| Battery Size and Type | Li-ion, 9V |
| Battery life | 4 yr, typical with reading interval of 1 min |
| Baud Rate | 250000 |
| Calibration | Digital Calibration through Software |
| Calibration Accuracy | Temperature: ± 0.05 °C |
| Calibration Date | Automated |
| Configuration | Omega Data Logging Software, Windows PC |
| Data Format | °C, °F, K, Ω, °R |
| Data Interface | Wireless, USB |
| Data Interface Note | USB to mini USB, 250,000 baud for standalone operation or OM-CP-RFC1000-EXT/ OM-CP-RFC1000-EXT-EUR/OM-CP-RFC1000-IP69K required for wireless operation |
| Display | LCD |
| Form factor | Wall Mount |
| Height | 0.95 in |
| Input Type | Internal |
| LED Functionality | Green LED blinks every 5 seconds to indicate unit is logging, Blue LED blinks every 15 seconds to indicate unit is in wireless mode, Red LED blinks every 1 second to indicate alarm condition |
| Length | 3.25 in |
| Materials | Plastic |
| Measurement Type | Temperature |
| Memory Modes | Yes |
| Number of Measurements | 1 |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -20 °C |
| Output Power, Max | +0dBm |
| Pressure Resolution | 0.02 mbar |
| Pulse Resolution | ≤10 µS |
| RF Frequency | 2.45 GHz |
| RF Frequency Note | 2.45GHz IEEE 802.15.4 ultra-low power wireless transceiver with fully bi-directional communication |
| RH Resolution | 0.001 |
| RTD Type | 2, 3 or 4-wire 100Ω Pt RTD, α= 0.00385 |
| Relative Humidity | 0 to 95% RH non-condensing |
| Response Time | Temperature: 10 min |
| Response Time Note | Temperature: 10 min free air |
| Samples,Max | 21504 Samples, Interval Selectable 1 Sec to 24 hrs |
| Sensor Type | RTD |
| Software | XP SP3/Vista/7 and 8 (32 and 64-bit) |
| Start Modes | Delayed Start, Immediate Start |
| Supply Power Note | Ultralife 9V lithium battery included; user replaceable |
| Temperature Measurement, Max | 850 °C |
| Temperature Measurement, Min | -200 °C |
| Time Accuracy | ± 1 minute/month |
| Weight | 4.1 oz |
| Width | 3.5 in |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 1 out of
5
by
bob2277 from
needs a computer
This data logger needs to be connected to a computer (either via cable or wireless) to work.
You can't even start it with a computer connected, then disconnect the computer... it stops displaying immediately...
Not very useful!
Date published: 2020-11-24
Rated 4 out of
5
by
SuperBob from
Is working well with our labratory.
We have them located in two opposite walls to monitor temperature and humidity. One issue is the software documentation. Will contact them.
Date published: 2023-04-05