1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
LR36
Pulse Radar Solids Level Transmitter (Minimal Dust)
Models In Stock
- Rugged L17 stainless steel antenna and process mount
- Configuration via push button display or HART communicator
- Gimbal flange for easy positioning with the angle of repose
- LCD displays level in feet or meters with percent of span bar
LR36
From
C$
4,455.61
Models In Stock
Product Overview
- Accuracy ± 10 mm
- Antenna Diameter 4 in
- Antenna Length 11.34 in
- Approvals CE, RoHS, FCC
- Approvals Note ATEX IIG Ex ia II C T6...T3 Ga IEC Ex ia IIC T6...T3 Ga CSA Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F & G; (T6... T3); Class I Zone 0 AEx ia IIC (T6... T3) Ga & Zone 20 AEx ia IIIC (T76°C to T146°C) Da; Ex ia IIC (T6...T3) Ga & Ex ia IIIC (T76°C to T146°C) Ga
- Bar Graph Percent of Span
- Beam Angle 8°
- Configuration Push Button, HART 7
- Deadband 12 in
- Display and Indications Echo Signal Curve
- Display Measuring Units ft, m
- Display Type LCD
- Electrical Connection 1/2 in NPT
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP67, NEMA Type 6
- Frequency 26 GHz
- Materials 316 Stainless Steel, Polycarbonate
- Measuring Range, Min 1 ft
- Memory Non-Volatile
- Number of Wires 2
- Operating Pressure, Max 580 psi
- Operating Pressure, Min -14.5 psi
- Power Consumption 22.5 mA
- Probe Type Antenna
- Process Connection Size 1 1/2 in
- Process Connection Type NPT Male and Female
- Process Temperature, Max 200 °C
- Process Temperature, Min -40 °C
- Signal fail-safe 3.9 mA, 20.5 mA, 22 mA
- Signal invert 4 to 20 mA, 20 to 4 mA
- Storage Temperature, Max 80 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 21.6 to 26.4 Vdc
- Tank Type Any
- Temperature Compensation Automatic
The intrinsically safe 26 GHz. pulse radar transmitter provides continuous level measurement up to 49.2 (15m) with a 4-20 mA analog and HART digital signal output, and is configured via its integral push button display module or HART communicator. The non-contact solids level sensor is intended for dry solid media including aggregates, grains, pellets, powders and building materials. Select this sensor for easy process conditions with minimal dust and installation with an adjustable mounting bracket or gimbal flange. Typical applications include bins, transfer stations and crushers.
