Welcome to our new website, found an issue or bug? Please report it here
USR03-Series
Short Range Ultrasonic Level/Distance Transmitter-Switch
Models In Stock
- Short 1.75 inch dead band
- Unaffected by optical factors like color and transparency
- PC or button “teachable” setup
- Narrow beam with adjustments to optimize performance
USR03-Series
From
C$
838.04
Models In Stock
Product Overview
- Accuracy ± 0.5 %
- Cable Length 6.5 ft
- Electrical Output 2 Outputs (0-20 mA,0-10 V)
- Enclosure Ratings IP68, NEMA Type 4X
- Loop Resistance 450 Ω max @ > 15 Vdc, 250 Ω max @ 10 Vdc
- Measuring Range, Max 36 in
- Measuring Range, Min 1.75 ft
- Media Compatibility Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
- Memory Non - Volatile
- Operating Humidity 0 to 100% RH
- Operating Pressure, Max 50 psi
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -40 °C
- Output Signal Current, Voltage
- Resolution 0.0034 in
- Transducer frequency 240 kHz
- Ultrasonic Beam Width 12 ° at -3db
- Weight 0.29 kg
USR03 Series sensors and OmegaVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration! Built rugged as with all Omega sensors, the USR03 is designed to address close up and shorter working distance requirements. Narrow beam width and shortened minimum range gives closeup versatility. Serial data and analog outputs respond to measured distance. Non-contact technology means nothing touches your materials.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Can the USR03 (or any other ultrasonic level sensor) be used to measure the level of foam in a tank, or will it cut through the foam and return the level of the fluid below the foam?
Thank you for your inquiry. Unfortunately, the ultrasonic sensor will not be able to penetrate thru foam if there is a buildup. Another option is the guided wave radar that can work or cut thru foam.
Date published: 2023-10-02
Can this be used on bins that contains powders ?
No, it cannot. For powder/solids review our radar level sensors LR series.
Date published: 2023-01-06
Hello, Does the USR03 take a pulser and controller? Is it a plug and play?
Thank you for your inquiry. The software that can be downloaded is to program the sensor to measure level and in the manual on page 26, you can find a wiring schematic of its use.
Date published: 2023-01-18
"Narrow beam with adjustments to optimize performance". What does this mean?
Thank you for your inquiry. You can reduce the starting gain from the maximum 15 dB, which reduces the width of the most sensitive area in front of the sensor and removes the early sensitivity of the gain curve. It is changed on the Measure window under the Advanced button.
Date published: 2022-11-08