Welcome to our new website, found an issue or bug? Please report it here
SA1-TH-44000
Self-Adhesive Polyimide Fast Response Thermistor Surface Sensors
Models In Stock
- Available in 5 Standard Resistance Values
- Self-Adhesive Design Can be Easily Applied to Flat and Curved Surfaces
- Sensor Can be Removed and Re-Applied
- Interchangeability of ± 0.2°C Standard (± 0.1°C Optional)
SA1-TH-44000
From
C$
63.43
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Cable Length 40 in
- Electrical Connection Stripped Leads
- Insulation PFA
- Process Temperature, Min -80 °C
- Sensor Length 1 in
- Sensor Width 0.75 in
- Temperature Sensor Type Thermistor
- Wire Gauge 26 AWG
- Wire Type Stranded
These surface mount thermistor sensors have an adhesive surface on the bottom of the sensor. Just remove the peel strip and apply to any dry, solid surface. These sensors are great for temporary installations, or for areas where installation options are limited.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Anonymous from
Small foot print, with perfect accuracy
Small footprint with spot on accuracy. The adhesive backing worked perfect against dry copper piping.
Date published: 2021-02-03
Rated 1 out of
5
by
Ben Mike Jones from
Leads need insulation
Thermistor Leads shorted because there is no insulation on them. Also reviewing the review tool used to write this review...it has required fields, why not let the customer determine what information they want to provide with the review.
Date published: 2016-03-11
Can the adhesive film be trimmed with no issues? The footprint is too large for my application.
Thank you for your inquiry. We do not recommend trimming the adhesive pad as it could affect the adhering capability of the sensor.
Date published: 2025-01-27
How do you convert the Thermistor resistance into degree Celsius? Do you have the equation? Thank you
You can calculate the temperature by using the Steinhart-Hart equations found on the Thermistor element data sheet. You can use "Thermistor Elements" in the search box to get to the appropriate page.
Date published: 2024-06-14
Hi. Is there a spec drawing of the sensor without the cable? Replacement sensor item number would also be helpful. Thank you.
Thank you for your inquiry. The drawing is available in the data sheet. We do not offer a replacement sensor for these.
Date published: 2024-10-11
Is there a detailed procedure for cementing this product to aluminum?
We have no formal procedure. Basically, please follow the steps below.
1) Peel adhesive backing off of the SA1 sensor.
2) Apply to clean surface.
3) With the SA1 sensor in place, spread your prepared cement mixture over the 'edges' of the SA1 pad and onto the surface being attached to, being sure that there is no 'break' in the cement material between the pad and material surface.
4) Allow to cure according to cement instructions.
Date published: 2020-03-03
Per ISO 13732-1 standard, 5.4.2; The measurement of the surface temperature shall be carried out by means of an electrical thermometer with a contact sensor made of metal and insignificant heat capacity. Does this thermistor have a metal contact sensor?
Thank you for your inquiry. This unit does not have a metal contact surface. Refer to the ON-909 Thermistor Sensors.
Date published: 2024-01-19
Is this product suitable for outdoor applications?
Thank you for your inquiry! Unfortunately, this product is not intended for outdoor use
Date published: 2021-03-18