Welcome to our new website, found an issue or bug? Please report it here
SP-006-Series
SP-006-Series Smart Pressure Probe
Models In Stock
- Low-cost Smart Pressure sensor
- All Stainless steel body
- Battery powered long range wireless capable with IF-006-Series
- 10,000+ sample data/event logging
SP-006-Series
From
C$
526.82
Models In Stock
Product Overview
- Accuracy ± 0.5 %
- Approvals CE, UKCA
- Burst Pressure 500 psi Maximum
- Configuration Configurable via Omega Link Smart Interface and SYNC configuration software
- Data Interface USB, Modbus, Wireless
- Digital Input VinHighThreshold = 2.2 VMAX, VinLowThreshold = 0.3 VMIN, VinMAX = 30 VDC
- Digital Output 2x Open Drain 100 mA max, VMAX = 30 VDC
- Enclosure Ratings IP50
- Internal Sensor Accuracy ± 1.5 °C
- Internal Temperature Resolution 0.1°C
- Measurement Type Pressure
- Number of Channels 1
- Number of I/O 2
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Pressure, Min 0 psi
- Pressure Resolution 0.1
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 80 °C
- Process Temperature, Min -10 °C
- Relative Humidity 95% RH, non-condensing
- Software Compatible with Omega Enterprise Gateway and SYNC configuration software
- Supply Power Type DC
- Supply Voltage 2.8 to 3.3 Vdc
Omega Link SP-006: Introduction
Omega Link Pressure Monitoring Smart Probes measure gas, liquid, and vapor pressure for a wide range of applications. Featuring all stainless-steel pressure sensor construction and available in 50, 100, and 250 psi configurations. No excitation is required as power is provided by Omega Link modular wireless or wired interfaces via a rugged M12 connector.
Users may apply a calibration correction to the measured pressure using either 1 single offset or a calculated 2-point correction for improved accuracy across the entire measurement range.
Temperature data is also available for monitoring the internal temperature of the pressure sensor.
Smart Core Enabled
Smart Core is integral to all Omega Link Smart Sensing Devices. In addition to allowing for modular integration to the Omega Link Ecosystem using any Omega Link Smart Interface, this powerful suite of advanced features enable plug-and-play connectivity, alarm and notifications, data logging, SYNC configuration, and storage of 10,000 data points and events.
Intuitive Configuration
Configure your Omega Link Smart Probe using our free SYNC configuration software. Configurable features include selective data extraction, measurement and device traceability, local alarms, and adaptive transmission rates.
Edge Control and Built in I/O
The Omega Link SP-006 features 2 discrete I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-006 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.
Modularity
Customize your Omega Link Ecosystem by taking advantage of discrete I/O features accessible through the modular addition of an M12.8-T-SPLIT and M12.8-S-M-FM terminal.
Long-Range Wireless Solution*
Pairing the SP-006 with the IF-006 Series interface produces a self-contained, long-range, wireless solution. This setup can also be externally powered by adding the UNIV-AC100/240-M8 power adaptor.
*Note: IF-006 must be paired with an Omega Link wireless gateway
PDFs & Manuals
Software & Drivers
