1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
FLR1000-Series
Stainless Steel Low Flow Turbine Flow Meter w/Optional Display
Models In Stock
FLR1000-Series
From
C$
537.93
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 4 out of
5
by
Special K from
These work as expected
We have used these in the past, so we know what to expect.
Date published: 2016-06-21
Rated 5 out of
5
by
Manoj Kumar from
Recommend to other other users. Great Product
Recommend to other other users. Great Product with very good quality.
Date published: 2025-02-07
Rated 5 out of
5
by
Muhammad Azeem Ghouri from
Digital Flow Sensor
This flow sensor that I bought works well. The display makes it very convenient to control the flow rate. I highly recommend it.
Date published: 2023-07-26
Rated 5 out of
5
by
mschmid from
Easy and Reliable
We have several of these FLR series flow meters in the lab. They are easy to use, and very reliable.
Date published: 2023-04-01
Rated 5 out of
5
by
mschmid from
Perfect
The flowmeter works perfectly out of the box as advertised.
Date published: 2023-02-05
Rated 1 out of
5
by
Sarath from
VERY POOR! Wrong Reading!
Bought this flowmeter and tested it (measuring cylinder and timer)only to realise the reading was way off the mark.
Please be careful, look for a calibration certification if you plan to get one.
Date published: 2022-02-18
Rated 4 out of
5
by
Pat W from
C+ to B-
FLR1204 20-100L/min works. Spec sheet states "fast response" I did not find this to be true. Power requirements states 30mA (typical) with 11.5 V to 15.0 V supply, so 0.345 W to 0.45 W. Data logger has .4 W. Will data logger power the senor or not??? Also, the FLR1204 sensor is on a by-pass plumbing, I was not aware of this.
Date published: 2021-02-27
Rated 3 out of
5
by
Bhampton from
works and functions but limited
Purchased unit but had to return the first one due to a defect on the screen. got the second one in and it works great, in an environment without any back pressure. The second any pressure is added to the mix the gauge is rendered useless. unfortunately the testing we are performing requires some pressure while still maintaining flow and we are not able to get the value we are looking for. looking at other gauges that might have a different system to make our test work.
Date published: 2019-04-10
What is the Mfr and P/N of the electrical connector? Or, better yet, the mating connector/crimps?
Thank you for your question?
We do not sell the connector alone. If you are looking for the power supply connector, the part number for the connector and cable is FLR1000-PW for 120VAC, or FLR1000-230PW for 230VAC. If you are looking for the communication cable connector, the part number for the connector and cable is FLR1000-C.
Date published: 2019-07-08
The user's guide / manual for these units (FLR1003 / FLR1203) indicate Viton O-rings as standard, but EPDM optional. Can I order the EPDM option?
Yes. Add suffix "-EPDM" to the part number for the EPDM O ring option.
Date published: 2019-10-22
Will this work with a coolant liquid at -10 C? The coolant is glycol-water mix.
Thanks for your question. The FLR1000 series meters have an operation temperature range of 5-55 C and a storage temperature range of 0-70 C. This meter cannot handle -10 C temperatures.
Date published: 2019-06-19
Will this work with automotive liquids such as gasoline, diesel? If not can you suggest an alternative low flow rate meter.
Thank you for your inquiry! These flow meters incorporate infrared light into the measurement of flow rate and thus require that all fluids be translucent. Additionally, they are calibrated with water and will deviate with viscosities varying from water. Though suitable for up to 10 centistokes, accuracy may be affected by the combination of these factors. The FLR series would still be our best suited option as we do not have another offering with a similar flow range and analog output.
Date published: 2024-04-25
What is the confidence level of the reported accuracy specification on these flow meters?
Thank you for your inquiry and unequivocally 100%
Date published: 2025-01-16
What is the pinout for this sensor in a 4-20 mA model? P/N FLR1009ST-I. Thank you.
Thank you for your inquiry about the flow meter. The manual outlines the wire schematic flow the "-I' flow meter such as the FLR1009ST-I meter you have. It goes as follows on page 13 of 34.
The RED wire should be connected to the Positive of the power source.
The BLACK wire should be connected to the Negative ( Ground ) of the
power source.
The WHITE wire provides the signal output (active current) and should be
connected to the positive terminal of the display, data acquisition system or
current meter with an impedance of 0 - 500Ω (Ohms).
The GREEN wire is NOT used.
Date published: 2022-01-05
Can I use this to measure the permeability of prepreg composite under a vacuum bag?
Thank you for your inquiry about the flow meter. Unfortunately, it is not recommend to use under vacuum. The FMA1700/1800A mass flow meters for gases can measure flow rate in vacuum conditions.
Date published: 2021-11-04
Can I use this meter as is to measure a water flow but also a more viscous (10 cP), transparent mix (water with honey) or do I need to do a measurement and calculate a conversion ("k") factor for the viscous fluid?
Thank you for your inquiry about this flow meter. Unfortunately, 10 cP is the maximum viscosity that the flow meter can handle or is recommended to measure. An alternative for viscous liquids is using a positive displacement flow meter.
Date published: 2021-09-22
RoHS 2015/863 - View Certificate
CE Approved
UKCA