Welcome to our new website, found an issue or bug? Please report it here
CSH5-Series
Stainless Steel Strip Heater Diagonal Terminals
Models In Stock
- A Reliable Heat Source with Seamless Stainless Steel Sheath
- Flat Surface Mounting Installations
- Used in Hundreds of Industrial and Commercial Heating Applications
- Ovens
CSH5-Series
From
C$
178.46
Models In Stock
Product Overview
- Applications Dies, Food and Beverage, Food Processing Equipment, Heat and Energy Systems, Heating Equipment, Molds
- Form factor Strip
- Height 0 in
- Current, Max Lead Wire Termination: 10 amp ; Screw Terminations: 10-32UNF—25 amp
- Mounting Slot Size 8 mm x 13 mm
- Number of Mounting Holes 2
- Physical Size Construction Limitations Width:16 mm (5/8") Wide Heaters: +0.000, -0.005";25 mm and 38 mm (1 and 1 1/2") Wide Heaters: +0.000, -0.010"; Thickness: 6 mm (1/4") Thick Heaters: +0.000, –0.005",8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008";[10 mm (3/8") thick heaters have radius corners];Length:Up to 24": ± 1/16";Over 24": ± 1/8"
- Power Density, Max 45 W/in²
- Power Tolerance 5%, -10%
- Resistance Tolerance 10%, -5%
- Special Bushings Size 13 mm x 16 mm
- Termination Terminals parallel on one side
- Voltage, Max 480 Vac
- Voltage Note 480 Vac (when applicable)
Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.
Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
Lead Wire Termination: 10 amp
Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
16 mm (5/8") Wide Heaters: +0.000, -0.005"
25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
6 mm (1/4") Thick Heaters: +0.000, –0.005"
8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
Up to 24": ± 1/16"
Over 24": ± 1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 à— 1/2")
Special Bushings: 13 x 16 mm (1/2 à— 5/8")
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.
Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
Lead Wire Termination: 10 amp
Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
16 mm (5/8") Wide Heaters: +0.000, -0.005"
25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
6 mm (1/4") Thick Heaters: +0.000, –0.005"
8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
Up to 24": ± 1/16"
Over 24": ± 1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 à— 1/2")
Special Bushings: 13 x 16 mm (1/2 à— 5/8")
| Model No. | Length | Wattage | Watt Density | |||
|---|---|---|---|---|---|---|
| 120V | 240V | inch | mm | Watt/in2 | Watt/cm2 | |
| — | CSH00294 | 71⁄2 | 190.5 | 200 | 19 | 3 |
| — | CSH00295 | 9 | 228.6 | 500 | 31 | 5 |
| CSH00296 | — | 101⁄2 | 266.7 | 250 | 12 | 2 |
| CSH00297 | — | 101⁄2 | 266.7 | 400 | 19 | 3 |
| — | CSH00298 | 12 | 304.8 | 500 | 18 | 3 |
| — | CSH00299 | 151⁄4 | 387.4 | 500 | 13 | 2 |
| — | CSH00300 | 17 | 431.8 | 1000 | 22 | 3 |
| — | CSH00301 | 177⁄8 | 454.0 | 350 | 7 | 1 |
| — | CSH00302 | 177⁄8 | 454.0 | 500 | 10 | 2 |
| — | CSH00303 | 18 | 457.2 | 1000 | 20 | 3 |
| — | CSH00304 | 181⁄2 | 469.9 | 500 | 10 | 2 |
| — | CSH00305 | 221⁄2 | 571.5 | 1000 | 15 | 2 |
| — | CSH00306 | 24 | 609.6 | 1000 | 14 | 2 |
| — | CSH00307 | 251⁄2 | 647.7 | 1000 | 13 | 2 |
| — | CSH00308 | 26 | 660.4 | 1600 | 20 | 3 |
| — | CSH00309 | 261⁄2 | 673.1 | 1500 | 18 | 3 |
| — | CSH00310 | 301⁄2 | 774.7 | 750 | 8 | 1 |
| — | CSH00311 | 311⁄2 | 800.1 | 800 | 8 | 1 |
| — | CSH00312 | 357⁄8 | 911.2 | 1000 | 9 | 1 |
| — | CSH00313 | 36 | 914.4 | 1000 | 9 | 1 |
| — | CSH00314 | 50 | 1270.0 | 1000 | 6 | 1 |
| — | CSH00315 | 62 | 1574.8 | 1500 | 7 | 1 |
PDFs & Manuals
