1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
MBH-Barrel
Steel 1 or 2-Piece Band Heater 900°F Max 2.5" to 10" ID
Models In Stock
- Built-In Bracket for Superior Clamping
- Unbreakable and Torque-Resistant Screw Terminals
- Temperatures Up to 480°C (900°F)
- Full Width Stainless Steel Built-In Strap
MBH-Barrel
From
C$
202.09
Models In Stock
Product Overview
- Additional Features 1 Dual Voltage: Available depending on heater design
- Insulator Type N/A
- Mounting Built-In Brackets (Heater Width/Number of Brackets): 38 to 76 mm (1¹⁄₂ to 3")-1;79 to 127 mm (3¹⁄₈ to 5")- 2; 130 to 145 mm (5¹⁄₈ to 6⁷⁄₈")- 3 ;178 to 254 mm (7 to 10")- 4; 257 to 381 mm (10¹⁄₈ to 15")- 5;If tighter tolerances are required, contact OMEGA
- Nominal Gap Note 9.5 mm (³⁄₈")—if a larger gap is required for probes or thermocouples, specify when ordering
- Power Tolerance +5%, -10%
- Resistance Tolerance +10%, -5%
- Sensor Type N/A
- Supply Power Note Dependent on heater size and operating temperature
- Width Tolerance ± 1/16"
Designed For Trouble-Free Service
The Duraband heater design is the result of many years of research, development and testing for a reliable mica insulated band heater that can perform at the higher operating temperatures [up to 480 °C (900 °F)] essential to process high temperature resins, providing long, efficient service necessary for todays high productivity of plastic extruders, injection and blow molding machines.
Duraband is a proven heater design for good life efficiency and dependability. It assures maintaining the lowest winding temperatures possible, keeping a low-mass heating element assembly for fast heat-up and quick thermal response to controls. It incorporates the low thermal expansion built-in strap, a unique design feature.
Advantages and Variations
Duraband mica insulated heaters are widely used on operations involving heating of cylindrical surfaces and are manufactured in a full range of standard construction variations, physical dimensions, electrical ratings, and a complete arrangement of screw terminals and lead terminations.
However, these standard Duraband heater variations and terminations do not represent the full extent of our capabilities. OMEGAs engineering staff, with many years of experience in heat processing and temperature control applications, can assist you in designing the right Duraband heater for your specific application.
Standard Specification and Tolerances
Performance Ratings
Maximum Temperature:
Standard Sheath: 482 °C (900 °F)
Nominal Watt Density: 3 to 7 Watt/cm² (20 to 45 Watt/in²)
Maximum Watt Density: Dependent on heater size and operating temperature
Electrical Ratings
Maximum Voltage: 480 Vac
Dual Voltage or 3-Phase: Available depending on heater design
Maximum Amperage:
Lead Wire Termination: 10 Amp
Screw Terminations: 8-32 UNF—20 Amp 10-32 UNF—25 Amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
Physical Size Construction Limitations
Minimum Width: 19.1 mm (3/4")
Width Tolerance: 1.59 mm ( ±1/16")
Minimum Inside Diameter: 22.1 mm (7/8")
Nominal Gap: 9.5 mm (3/8")—if a larger gap is required for probes or thermocouples, specify when ordering
Built-In Brackets
Heater Width
38 to 76 mm (1 1/2 to 3") Number of Brackets 1
79 to 127 mm (3 1/8 to 5") Number of Brackets 2
130 to 145 mm (5 1/8 to 67/8") Number of Brackets 3
178 to 254 mm (7 to 10") Number of Brackets 4
257 to 381 mm (10 1/8 to 15") Number of Brackets 5
If tighter tolerances are required, contact OMEGA.
The Duraband heater design is the result of many years of research, development and testing for a reliable mica insulated band heater that can perform at the higher operating temperatures [up to 480 °C (900 °F)] essential to process high temperature resins, providing long, efficient service necessary for todays high productivity of plastic extruders, injection and blow molding machines.
Duraband is a proven heater design for good life efficiency and dependability. It assures maintaining the lowest winding temperatures possible, keeping a low-mass heating element assembly for fast heat-up and quick thermal response to controls. It incorporates the low thermal expansion built-in strap, a unique design feature.
Advantages and Variations
Duraband mica insulated heaters are widely used on operations involving heating of cylindrical surfaces and are manufactured in a full range of standard construction variations, physical dimensions, electrical ratings, and a complete arrangement of screw terminals and lead terminations.
However, these standard Duraband heater variations and terminations do not represent the full extent of our capabilities. OMEGAs engineering staff, with many years of experience in heat processing and temperature control applications, can assist you in designing the right Duraband heater for your specific application.
Standard Specification and Tolerances
Performance Ratings
Maximum Temperature:
Standard Sheath: 482 °C (900 °F)
Nominal Watt Density: 3 to 7 Watt/cm² (20 to 45 Watt/in²)
Maximum Watt Density: Dependent on heater size and operating temperature
Electrical Ratings
Maximum Voltage: 480 Vac
Dual Voltage or 3-Phase: Available depending on heater design
Maximum Amperage:
Lead Wire Termination: 10 Amp
Screw Terminations: 8-32 UNF—20 Amp 10-32 UNF—25 Amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
Physical Size Construction Limitations
Minimum Width: 19.1 mm (3/4")
Width Tolerance: 1.59 mm ( ±1/16")
Minimum Inside Diameter: 22.1 mm (7/8")
Nominal Gap: 9.5 mm (3/8")—if a larger gap is required for probes or thermocouples, specify when ordering
Built-In Brackets
Heater Width
38 to 76 mm (1 1/2 to 3") Number of Brackets 1
79 to 127 mm (3 1/8 to 5") Number of Brackets 2
130 to 145 mm (5 1/8 to 67/8") Number of Brackets 3
178 to 254 mm (7 to 10") Number of Brackets 4
257 to 381 mm (10 1/8 to 15") Number of Brackets 5
If tighter tolerances are required, contact OMEGA.
| Model Number | Inside Diameter | Width | Watt | Watt Density | Style | ||||
|---|---|---|---|---|---|---|---|---|---|
| 120V | 240V | mm | inch | mm | inch | Watt/cm2 | Watt/in2 | ||
| MBH00098 | — | 63.5 | 21/2 | 38.1 | 11/2 | 300 | 4.5 | 29 | NE |
| MBH00099 | MBH00108 | 76.2 | 3 | 25.4 | 1 | 300 | 5.6 | 36 | SE |
| MBH00100 | MBH00109 | 76.2 | 3 | 38.1 | 11/2 | 500 | 6.2 | 40 | NE |
| MBH00101 | MBH00110 | 76.2 | 3 | 50.8 | 2 | 500 | 4.6 | 30 | NE |
| — | MBH00111 | 79.4 | 31/8 | 50.8 | 2 | 450 | 4.0 | 26 | NE |
| — | MBH00112 | 82.6 | 31/4 | 50.8 | 2 | 400 | 3.4 | 22 | NE |
| — | MBH00113 | 88.9 | 31/2 | 38.1 | 11/2 | 550 | 5.7 | 37 | NE |
| — | MBH00114 | 88.9 | 31/2 | 50.8 | 2 | 600 | 4.7 | 30 | NE |
| — | MBH00115 | 88.9 | 31/2 | 76.2 | 3 | 300 | 1.6 | 10 | NE |
| — | MBH00116 | 88.9 | 31/2 | 76.2 | 3 | 625 | 3.2 | 21 | NE |
| MBH00102 | MBH00117 | 95.3 | 33/4 | 38.1 | 11/2 | 600 | 5.8 | 37 | NE |
| MBH00103 | MBH00118 | 95.3 | 33/4 | 63.5 | 21/2 | 850 | 4.9 | 32 | NE |
| — | MBH00119 | 101.6 | 4 | 25.4 | 1 | 550 | 7.4 | 48 | SE |
| — | MBH00120 | 101.6 | 4 | 38.1 | 11/2 | 550 | 4.9 | 32 | NE |
| MBH00104 | — | 104.8 | 41/8 | 25.4 | 1 | 400 | 5.2 | 33 | SE |
| — | MBH00121 | 114.3 | 41/2 | 25.4 | 1 | 550 | 6.5 | 42 | SE |
| — | MBH00122 | 114.3 | 41/2 | 50.8 | 2 | 800 | 4.7 | 30 | NE |
| — | MBH00123 | 120.7 | 43/4 | 19.1 | 3/4 | 150 | 2.2 | 14 | SE |
| — | MBH00124 | 123.8 | 47/8 | 38.1 | 11/2 | 900 | 6.5 | 42 | NE |
| — | MBH00125 | 127.0 | 5 | 38.1 | 11/2 | 700 | 4.9 | 32 | NE |
| — | MBH00126 | 127.0 | 5 | 44.5 | 13/4 | 600 | 3.6 | 23 | NE |
| — | MBH00127 | 127.0 | 5 | 50.8 | 2 | 950 | 5.0 | 32 | NE |
| — | MBH00128 | 127.0 | 5 | 63.5 | 21/2 | 1000 | 4.2 | 27 | NE |
| — | MBH00129 | 139.7 | 51/2 | 25.4 | 1 | 550 | 5.2 | 34 | SE |
| — | MBH00130 | 139.7 | 51/2 | 38.1 | 11/2 | 500 | 3.2 | 20 | NE |
| — | MBH00131 | 139.7 | 51/2 | 38.1 | 11/2 | 900 | 5.7 | 37 | NE |
| — | MBH00132 | 139.7 | 51/2 | 50.8 | 2 | 500 | 2.4 | 15 | NE |
| — | MBH00133 | 139.7 | 51/2 | 69.9 | 23/4 | 620 | 2.1 | 14 | NE |
| — | MBH00134 | 139.7 | 51/2 | 76.2 | 3 | 1750 | 5.6 | 36 | NE |
| MBH00105 | — | 152.4 | 6 | 25.4 | 1 | 300 | 2.6 | 17 | SE |
| — | MBH00135 | 152.4 | 6 | 38.1 | 11/2 | 500 | 2.9 | 19 | NE |
| — | MBH00136 | 152.4 | 6 | 38.1 | 11/2 | 850 | 4.9 | 32 | NE |
| MBH00106 | — | 155.6 | 61/8 | 25.4 | 1 | 600 | 5.1 | 33 | SE |
| — | MBH00137 | 158.8 | 61/4 | 50.8 | 2 | 500 | 2.1 | 13 | NE |
| — | MBH00138 | 165.1 | 61/2 | 38.1 | 11/2 | 750 | 4.0 | 26 | NE |
| — | MBH00139 | 177.8 | 7 | 25.4 | 1 | 550 | 4.1 | 26 | SE |
| — | MBH00140 | 190.5 | 71/2 | 50.8 | 2 | 1500 | 5.6 | 36 | NE |
| MBH00107 | — | 206.4 | 81/8 | 50.8 | 2 | 1200 | 5.9 | 38 | NE |
| — | MBH00141 | 254.0 | 10 | 50.8 | 2 | 2000 | 6.4 | 41 | NE |
| Ordering Example: MBH00122, 240V, 800 watt, barrel band heater. | |||||||||
PDFs & Manuals
Show Ratings & Reviews
What is the minimum operational temperature of these band heaters? Our application requires use at -180C.
The Band Heaters do not have a low temperature rating and use to -180C is not recommended and would void any warranty.
Date published: 2023-01-07
In the product details it says with 4 brackets these can be installed on 10.125" to 15" diameters. Can the MBH00141 be strapped onto a 14" diameter tube?
Thank you for your inquiry. Heaters that use 4 brackets have a heater width of 7 to 10". Width and Diameter do not mean the same. The MBH00141 can handle a pipe diameter of 10" maximum.
Date published: 2021-09-03
Hi, are these rated for hazardous locations? Thanks Tim
Thank you for your inquiry. This heater is not rated for hazardous locations.
Date published: 2020-07-13