Welcome to our new website, found an issue or bug? Please report it here
FST-321-SPST
Choose a Variant
Enclosure Material
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 5 % |
| Accuracy Note | ±5% of setpoint at constant temperature and flowrate |
| Additional Features 1 | |
| Adjustments | Potentiometer |
| Approvals | CE |
| Approvals Note | CE compliance: EN 61326 EMC EN 61010‐1 safety |
| Cable Length | 10 ft |
| Cable Length Note | Max: 100 ft |
| Diameter | 1.05 in |
| Electrical Connection | 3/4 in NPT male Conduit with Screw Terminal block |
| Enclosure Material | Polypropylene, PVDF |
| Length | 3 in |
| Linear Flow Rate, Max | 90 ft/s |
| Linear Flow Rate, Min | 1 ft/s |
| Media Compatibility | Gases |
| Operating Pressure Note | Maximum Fluid Pressure: PP or PVDF: 150 psi @ 25°C (77°F) derated @ 1.667 psi per °C above 25°C (77°F) |
| Operating Pressure, Max | 150 psi |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -40 °C |
| Pipe Size, Max | 1.5 in |
| Pipe Size, Min | 0.75 in |
| Power Consumption | 70 mA |
| Process Connection Size | 3/4 in |
| Process Connection Type | NPT Male |
| Process Temperature, Max | 60 °C |
| Process Temperature, Min | 0 °C |
| Response Time | 10 sec |
| Response Time Note | 10 sec after initial 30 sec warm up |
| Supply Power Note | 12 to 36 Vdc @ 70 mA |
| Supply Voltage | 12 to 36 Vdc |
| Switch Rating | 1 A |
| Switch Type | SPST NO/NC, Selectable |
| Thermal Effects | 0.5%/°C |
| Wire Gauge | 22 AWG |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews