Welcome to our new website, found an issue or bug? Please report it here
TH-10-44000
Thermistor Immersion Probes with Lead Wire
Models In Stock
- Stainless Steel Sheath - Straight with No Transition
- Precision 5,000 and 10,000 Ohm Models Standard, Also Available in 2,252 ohm, 3,000 ohm and 30,000 ohm Configurations
- Interchageability Tolerance: ± 0.2°C Standard, ± 0.1°C Optional
- Can be Used With a Wide Variety of Compression Fittings
TH-10-44000
From
C$
57.00
Models In Stock
Product Overview
- Fittings Note Compatible With SSLK and BRLK Compression Fittings
- Probe Type General Purpose Thermistor Probes
- Process Temperature, Min -80 °C
- Sheath Material 304 Stainless Steel
- Temperature Probe Style Immersion Probe
- Temperature Sensor Type Thermistor
- Thermistor Resistance Temperature, Max 70 °C
- Thermistor Resistance Temperature, Min 0 °C
- Wire Type Stranded
This TH-10 Series general purpose thermistor probes have a stainless steel sheath sealed at the tip for direct immersion into process liquids. The straight sheath design, with 40 inches of extension cable, adapts well to use with a wide variety of transition fittings. This design makes for a more compact probe when space limitations are a factor. For a straight sheath with strain relief spring and transition, see the TJ36-44000 series probe.
Thermistor resistances of 5,000 and 10,000 ohms are standard with 2,252, 3,000 and 30,000 ohm resistances available. Standard interchangeability is ± 0.2°C, with an optional interchangeability of ± 0.1°C available.
Thermistor resistances of 5,000 and 10,000 ohms are standard with 2,252, 3,000 and 30,000 ohm resistances available. Standard interchangeability is ± 0.2°C, with an optional interchangeability of ± 0.1°C available.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Kasra from
Engineer
Got delivered very fast. Very Accurate measurement
Date published: 2024-05-28
Rated 4 out of
5
by
Tim B from
Good Product with Room for Improvement
This part meets almost all of our expectations. They give you plenty of cable to work with. Personally, we cut the cable to about 8 inches of length and put a connector on it for easy replacement. The only downside is there's no strain relief at the probe to cable transition. Our wire got bent back and forth several times over the course of a month and broke off. This kind of damage can not be fixed, requiring us to buy a new part. Overall, great product. Only improvement would be adding strain relief to the transition to prevent failure like this.
Date published: 2019-04-12
Can the unit be provided with 1/8" dia tube and a 44018 thermisor ?
Thank you for your inquiry Anonymous. Due to the complexity of your questions, please contact our Temperature Department at 1-800-622-2378, ask for Temperature Engineering or temp@omega.com for further assistance.
Date published: 2023-07-06
Recommend replacement for TH-10-44007-1/4-2-40 Thermistor?
Thank you for your inquiry. The closest replacement for this product is the TH-10-44007-1/8-2-40: https://www.omega.com/en-us/temperature-measurement/temperature-probes/probes-with-lead-wires/th-10-44000/p/TH-10-44007-1-8-2-40
Date published: 2024-02-23
Can a NIST traceable certificate be provided with this sensor?
Thank you for your inquiry Automation Engineer. This sensor does not come with a NIST certificate. Please send a quote requesting this sensor with calibration from sales@omega.com
Date published: 2023-07-06