Welcome to our new website, found an issue or bug? Please report it here
PP3-PP6-PP10
Thermocouple Temperature Profile Probes
Models In Stock
- 3, 6, & 10 Sensing Points
- 18 and 36' Lengths
- 36' Long, 24 AWG Stranded Individual Leads
- 3/16' Diameter 316SS Sheaths
PP3-PP6-PP10
From
C$
728.76
Models In Stock
Product Overview
- Cable Length 40 in
- Color Code Standard ANSI
- Electrical Connection Miniature Male Thermocouple Connector
- Insulation PFA
- Probe Diameter 0.1875 in
- Process Temperature, Min 0 °C
- Sheath Material 316 Stainless Steel
- Wire Gauge 24 AWG
Profile probes consist of several smaller diameter thermocouples placed inside a single outer sheath. They are best suited for profiling the temperature at various points along a single axis. They can be used in many different applications: furnaces, reactors, heat exchangers, air ducts, and more. Mounting these multipoint probes with compression fittings permit easy adjustment of insertion position.
Profile Probe Configurator
The table below shows some typical configurations of profile probes. Omega also offers the Profile Probe Configurator a flexible online tool that will allows a user to configure a custom profile probe with up to 6 thermocouples. The Profile Probe Configurator is easy to use and does not require any log-on information. It provides in realtime the the price and availability of the configured probe. The probe may be immediately ordered online or just note the part number and order anytime in the future by visiting Omega.com's Quick Order Page. The same part number may even be used for ordering through the telephone and fax. Visit the Profile Probe Configurator now.
Profile Probe Configurator
The table below shows some typical configurations of profile probes. Omega also offers the Profile Probe Configurator a flexible online tool that will allows a user to configure a custom profile probe with up to 6 thermocouples. The Profile Probe Configurator is easy to use and does not require any log-on information. It provides in realtime the the price and availability of the configured probe. The probe may be immediately ordered online or just note the part number and order anytime in the future by visiting Omega.com's Quick Order Page. The same part number may even be used for ordering through the telephone and fax. Visit the Profile Probe Configurator now.
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Forsmann from
Almost Perfect
I have used two of these for some time. would be nice to get a 24" with 6 TC's at 2" apart readings. Having only the 18" or 36" as choices makes it rough to be very versatile.
Date published: 2016-10-12
Is it possible to have this built with 12 sensors?
Thank you for the inquiry. Yes, these can be made with 12 sensors. Probes are not bendable.
Best regards
OMEGA
Date published: 2021-03-06
How are these calibrated?
Hi Sjay,
Individual probes are checked before assembly. If you require NIST traceable certification, it must be noted part as of initial request.
Best regards,
OMEGA
Date published: 2024-09-25
What is the spacing and thermal isolation of the sensors?
Thank you for your inquiry. 4.5" Spacing between each sensor. No thermal isolation information available.
Date published: 2021-01-30
Would this work in a 60" continuous oven with the probe perpendicular to direction of travel?
Thank you for the inquiry. Profile probe may work for your application. Please forward request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-12-19
I would like to get a quote for a custom profile probe by email. What I need to change is the distance between the sensors. Also I would like to know what fitting size for the probe since I'm going to use it in pressurized system. Thank you.
Thank you for your inquiry. Please send your custom profile probe request to temp@omega.com and we will review your requirements and respond accordingly.
Date published: 2021-04-23
Looking at profile probe PP6-36-K-U-18. What is the minimum spacing available between the points? We ideally would like 1/2" spacing, but can also accept 1" spacing. Please advise the minimum spacing available. Thanks
On the PP6-36-K-U-18 sensor spacing is at 1.75" and the PP10 probes would be 1.25" spacing. These are standard probes and any alterations would require it to be a Custom product. You can provide a sketch from the product pages data sheet with all the needed parameters and send it to temperature@omega.com.
Date published: 2022-11-18