Skip to search Skip to main content Skip to navigation

Welcome to our new website, found an issue or bug? Please report it here

We noticed you are from . Visit your local site for regional offers and live support.

LVCN1700-Series

Ultrasonic Level Controller w/3 SPDT Switches

Models In Stock
  • Offered in 3 Ranges From 3 to 8 m (9.8 to 26.2')
  • Configuration is Simple Via Integral Pushbutton Display Module
  • Three Programmable Relays for Switch, Pump Control and Fail-Safety
  • LCD Display Indicates Level Height and Relay Status
LVCN1700-Series
From C$ 1,489.88
Models In Stock
Ultrasonic Level Controller w/3 SPDT Switches LVCN1700-Series LVCN1700-Series
loading all models
Product Overview
  • Approvals General purpose, CE, RoHS
  • Display LCD
  • Display Measuring Units cm, ft, in, m, %
  • Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
  • Enclosure Ratings IP66, NEMA Type 4
  • Insulation PVC
  • Materials, Wetted FKM, PVDF
  • Media Compatibility Oil, Solvents, Water
  • Number of Digits 6
  • Operating Pressure, Max 30 psi
  • Operating Temperature, Max 71 °C
  • Operating Temperature, Min -40 °C
  • Process Temperature, Max 60 °C
  • Process Temperature, Min -20 °C
  • Repeatability 0.25 in
  • Supply Power Type AC
  • Supply Voltage 95 to 250 Vac, 20 W @ 120 Vac
  • Switch Note Relay 1, SPDT relays Relay 2 and 3, SPST, N.O. All commons connected together
  • Switch Rating 1 A @ 60 or 120 Vac/Vdc
  • Switch Type SPDT NO/NC, Selectable
OMEGA’s LVCN1700 ultrasonic level sensor provides level detection up to 8 m (26.2') with 3 programmable relays for level switch or level control functions, and is configured via the integral pushbutton display module. Each relay can be configured on a single set-point (high level alarm or low level alarm) or latched on two set points for automatic fill or empty in simplex (one pump or valve), duplex (two pumps) or triplex (three pumps) level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications

Specifications
Range:
LVCN1710: 10 cm to 3 m (4" to 9.8')
LVCN1718: 20 cm to 5.5 m (8" to 18')
LVCN1726: 20 cm to 8 m (8" to 26.2')
Repeatability: 6.35 mm (0.25")
Dead Band:
LVCN1710: 10 cm (4")
LVCN1718/26: 20 cm (8")
Beam Width:
LVCN1710: 5 cm (2")
LVCN1718/26: 7.6 cm (3")
Configuration: Pushbutton
Memory: Non-volatile
Display Type: LCD, 6-digit
Display Units: Inch, cm, percent, feet or meter
LCD Indication: Level and relay status
Supply Voltage: 95 to 250 Vac
Power: 20 W @ 120 Vac
Contact Type: (3) SPDT relays
Contact Rating: 60 VA, 1A max
Contact Fail-Safe: Open, close or hold last
Process Temp: -20 to 60°C (-7 to 140°F)
Temp Comp: Automatic
Ambient Temp: -40 to 71°C (-40 to 160°F)
Pressure: Maximum Working Pressure = 30 psi (2 bar)
Enclosure
Rating: NEMA 4X (IP65)
Material: Polycarbonate
Hardware: Brass and stainless
Vent: Water tight membrane
Trans Material: PVDF
Conduit Entrance: Dual, ½ NPT
Process Mount:
LVCN1710: 1 NPT (1" G optional)
LVCN1718/26: 2 NPT (2" G optional)
Mount Gasket: FKM
Classification: General purpose
Compliance: RoHS
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 17ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
en-CA
en_CA
Save Configuration