1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
LVCN210-Series
Ultrasonic Level Transmitter and Controller
Models In Stock
- Level Detection, Switch and Control Functions Up to 3 m (9.8')
- Fast and Easy Configuration Via Free Software Download and USB Adaptor
- Narrow 5.08 cm (2') Beam Width and Short 10 cm (4') Dead Band
- Four Programmable Relays
LVCN210-Series
From
C$
1,060.54
Models In Stock

Product Overview
- Accuracy ± 0.2 %
- Beam Width 2 in
- Cable Length 48 in
- Cable Type Insulated Shielded
- Compliance CE, RoHS 2
- Configuration Free PC Windows® USB 2.0.The level sensor is configurable via our free PC software and USB adaptor. The sensors are offered with and without USB connectors. Connectors can be used to configure many compatible level products. Download your free copy at
- Contact Fail-Safe Power Loss: Hold Last
- Data Interface USB
- Diameter 3.06 in
- Electrical Output 4 to 20 mA
- Enclosure Ratings NEMA Type 13
- Height 4.9 in
- Insulation Polyurethane
- Loop Resistance 400 Ω max
- Materials FKM, Fluoroelastomer, Polycarbonate, Polyvinylidene, Fluoride
- Mean Hysteresis Selectable
- Measuring Range, Max 9.8 ft
- Measuring Range, Min 0 ft
- Media Compatibility Alkaline solutions, Dilute Acids, Hydraulic Oil, Light Oil, Oil, Solvents, Water, Water-based fluids
- Memory Non - Volatile
- Number of Wires 2
- Operating Pressure, Max 30 psi
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -35 °C
- Output Signal Current
- Process Connection Size 1 in
- Process Connection Type NPT Male
- Process Temperature, Max 60 °C
- Process Temperature, Min -7 °C
- Resolution 0.039 in
- Signal fail-safe 4 mA, 20 mA, 21 mA, 22 mA or hold last
- Signal invert 4 to 20 mA or 20 to 4 mA
- Supply Voltage 24 Vdc
- Switch Rating 60 VA,1A max
- Switch Type SPST
- Temperature Compensation Automatic
OMEGAs LVCN210 Series ultrasonic level transmitter and controller provides continuous level measurement up to 3 m (9.8') with a 4 to 20 mA signal output, and is configured via our free software download. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.
Specifications
Range: 3 m (9.8')
Accuracy: ±0.2% of range
Resolution: 1 mm (0.039")
Dead Band: 10 cm (4")
Beam Width: 5.08 cm (2")
Configuration: Free PC Windows® USB 2.0.The level sensor is configurable via our free PC software and USB adaptor. The sensors are offered with and without USB connectors. Connectors can be used to configure many compatible level products. Download your free copy at: omega.com/ftp
Memory: Non-volatile
Supply Voltage: 24 Vdc (loop)
Consumption: 0.5 W
Loop Resistance: 400? max
Signal Output: 4 to 20 mA, two-wire
Signal Invert: 4 to 20 mA or 20 to 4 mA
Signal Fail-Safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Contact Type: (4) SPST relays
Contact Rating: 60 VA, 1A max
Contact Fail-Safe: Power loss; Hold last
Echo Loss: Open, close or hold last
Hysteresis: Selectable
Process Temp: -7 to 60 °C (20 to 140 °F)
Temp Comp: Automatic
Ambient Temp: -35 to 60 °C (-31 to 140 °F)
Pressure: Maximum Working Pressure = 2 bar (30 psi)
Enclosure Rating: Type 6P, encapsulated, corrosion resistant and submersible
Enclosure Material: Polycarbonate
Trans. Material: PVDF
Cable Jacket Mat: Polyurethane
Cable Type: 9-conductor, shielded
Cable Length: 1.2 m (48")
Process Mount: 1 NPT (1" G optional)
Mount Gasket: FKM
Classification: General purpose
Compliance: CE, RoHS
Read More
Specifications
Range: 3 m (9.8')
Accuracy: ±0.2% of range
Resolution: 1 mm (0.039")
Dead Band: 10 cm (4")
Beam Width: 5.08 cm (2")
Configuration: Free PC Windows® USB 2.0.The level sensor is configurable via our free PC software and USB adaptor. The sensors are offered with and without USB connectors. Connectors can be used to configure many compatible level products. Download your free copy at: omega.com/ftp
Memory: Non-volatile
Supply Voltage: 24 Vdc (loop)
Consumption: 0.5 W
Loop Resistance: 400? max
Signal Output: 4 to 20 mA, two-wire
Signal Invert: 4 to 20 mA or 20 to 4 mA
Signal Fail-Safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Contact Type: (4) SPST relays
Contact Rating: 60 VA, 1A max
Contact Fail-Safe: Power loss; Hold last
Echo Loss: Open, close or hold last
Hysteresis: Selectable
Process Temp: -7 to 60 °C (20 to 140 °F)
Temp Comp: Automatic
Ambient Temp: -35 to 60 °C (-31 to 140 °F)
Pressure: Maximum Working Pressure = 2 bar (30 psi)
Enclosure Rating: Type 6P, encapsulated, corrosion resistant and submersible
Enclosure Material: Polycarbonate
Trans. Material: PVDF
Cable Jacket Mat: Polyurethane
Cable Type: 9-conductor, shielded
Cable Length: 1.2 m (48")
Process Mount: 1 NPT (1" G optional)
Mount Gasket: FKM
Classification: General purpose
Compliance: CE, RoHS
PDFs & Manuals
Software & Drivers