Welcome to our new website, found an issue or bug? Please report it here
CS8DPT-C24-EIP-A
Platinum Series Universal Benchtop PID Controllers
Choose a Variant
Data Interface
Display Type
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$1,620.05 |
| 10-24 | C$1,539.05 |
| 25-49 | C$1,458.05 |
| 50-99 | C$1,377.04 |
| 100-499 | C$1,296.04 |
| 500+ | C$1,215.04 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | Dual Slope |
| Accuracy | Selectable |
| Accuracy Note | Process/Strain (Process Voltage): 0.03% FS,Process (Process Current ) : 0.03% FS,Type J (Iron-Constantan) : 0.4°C,Type K (CHROMEGA®-ALOMEGA® ) :1.0°C, 0.4°C,Type T (Copper-Constantan ) :1.0°C,0.4°C,Type E (CHROMEGA-Constantan ) :1.0°C ,0.4°C,Type R (Pt/13%Rh-Pt ) :1.0°C, 0.5°C,Type S (Pt/10%Rh-Pt ) :1.0°C,0.5°C,Type B (30%Rh-Pt/6%Rh-Pt ) :1.0°C,0.5°,Type C (5%Re-W/26%Re-W ) : 0.4°C,Type N (Nicrosil-Nisil ) :1.0°C ,0.4°,RTD (Pt, 0.00385, 100Ω, 500Ω, 1000Ω ): 0.3°C,RTD (Pt, 0.003916, 100Ω ): 0.3°C,RTD (Pt, 0.00392, 100Ω ): 0.3°,Thermistor (2252Ω) : 0.2°C,Thermistor (5K Ω) : 0.2°C,Thermistor (10K Ω) : 0.2°C |
| CMRR | 120 dB |
| Control Output | SSR Relay |
| Current, Max | 4 to 20 mA |
| Data Interface | Ethernet, RS485, RS232, USB |
| Data Interface Note | Ethernet: IEEE 802.3 10/100 Supported Protocols: TCP/IP, ARP, HTTPGET RS232/RS485: Selectable from menu; both ASCII and Modbus protocol selectable from menu; programmable 1200 to 115K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status |
| Decimal Selection | 0,001, 0,01, 0,1, None |
| Digital Filter | Programmable |
| Display Type | 4 Digit LED |
| Display Type Note | 4 or 6-digit, 9-segment LED with size 21 mm (83") and 10.2 mm (40"); RED, GREEN, and AMBER, and programmable colors for process variable, and temperature units |
| Form factor | Benchtop |
| Height | 108 mm |
| Input Configuration | Differential |
| Input Type | Thermocouple, RTD, Thermistor, mA, Voltage, Strain |
| Input Voltage | -100 to 100 mV, -1 to 1 Vdc, 0 to 10 Vdc |
| Length | 230 mm |
| Measurement Type | Current, Strain, Temperature, Voltage |
| Measuring Range | "Process/Strain (Process Voltage):± 50 mV, ± 100 mV, ± 1 Vdc, ± 10 Vdc, Process (Process Current ) : Scalable within 0 to 24 mA, Type J (Iron-Constantan) : -210 to 1200°C, Type K (CHROMEGA®-ALOMEGA® ) :-270 to -160°C,-160 to 1372°C, Type T (Copper-Constantan ) :-270 to -190°C,-190 to 400°C, Type E (CHROMEGA-Constantan ) :-270 to -220°C,-220 to 1000°C, Type R (Pt/13%Rh-Pt ) :-50 to 40°C,40 to 1788°C, Type S (Pt/10%Rh-Pt ) :-50 to 100°C,100 to 1768°C, Type B (30%Rh-Pt/6%Rh-Pt ) :1100 to 640°C,640 to 1820°C, Type C (5%Re-W/26%Re-W ) :0 to 2320°C, Type N (Nicrosil-Nisil ) :-250 to -100°C°,-100 to 1300°C, RTD (Pt, 0.00385, 100Ω, 500Ω, 1000Ω ):-200 to 850°C, RTD (Pt, 0.003916, 100Ω ): -200 to 660°C, RTD (Pt, 0.00392, 100Ω ): -200 to 660°C, Thermistor (2252Ω) : -40 to 120°C, Thermistor (5K Ω) :-30 to 140°C, Thermistor (10K Ω) : -20 to 150°C |
| Number of Control Outputs | 3 |
| Number of Inputs | 1 |
| Output Detail | SSR, Relay, Analog;5A SSR (internal), 3A relay max, analog process output |
| Output Signal | Current, Voltage |
| Polarity | Bipolar |
| Power Consumption | 6 W |
| RTD Type | 100/500/1000Ω Pt sensor; 2-, 3- or 4-wire; α=0.00385 or 0.00392 |
| Ramp and Soak | Profiling |
| Resolution | 1°/0.1°; 10 µV process |
| Sampling Rate | 20 Hz (20 updates/second) |
| Supply Power Type | AC |
| Supply Voltage | Selectable to 5, 10, 12, 24 Vdc @ 25 mA |
| Temperature Stability | Temperature Stability:RTD: 0.04°C/°C;Thermocouple: 25°C (77°F); coldjunction compensation of 0.05°C/°C;Process: 50 ppm/°C |
| Thermistor Type | 2252 Ω, 5K Ω, 10K Ω |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L |
| Weight | 1.13 kg |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 4 out of
5
by
Ken M from
Great Product - Weak Documentation
Overall, I'm happy with the instrument. However, the learning curve is steep and I think very difficult if you were to attempt to use this equipment without the Platinum Monitor software. It is here where the documentation is quite weak. If I did not use the software it is doubtful I would have ever been able to get have gotten this controller to work correctly. Even with the software it took me a couple hours to get the controller working well for the mechanical on/off relay output and another couple hours with the PID solid state relay output.
The takeaway is the documentation leaves a lot to be desired. First, the manual that accompanies the controller barely mentions the Platinum Monitor software. In my opinion, it should be required and this is coming from someone who has used CN76000 temperature controllers with no client software for many years. The reason for this is the CN76000 documentation is excellent.
One other gripe is the USB interface uses a USB-A to USB-A connector in order to connect it to a PC running the Platinum Monitor software. That is a very uncommon cable which I had to order. This cable should have shipped with the unit.
Date published: 2021-01-11
Rated 1 out of
5
by
Ajka from
Can't get it to work
The unit came 3 months late. The manual as someone pointed out is very confusing. When I complained about the manual I was given a CNPT manual as that is slightly more detailed. However, I cannot get this to work for past 3 months now. The response from the technical team takes about 2-3 days at the earliest and weeks if I do not contact again. They respond by giving clue for one small thing that we would have already tried. One can only leave voice message to technical team. The system powers, but when the program is run it keeps giving a message either OPEN or RANGE, none of these options are given in the manual as error or what to do in this case. There are projects and deliverables that are hurting and I cannot seem to get someone to call me and walk me through the unit. It seems they are relying on prior knowledge of the users who have experience with Omega controllers. I downloaded the software but it cannot recognize that the unit is connected. I was told to check whether the firewall is blocking the recognition but that is not the case. I am unsure how long will I have to wait to get this to work.
Date published: 2023-05-17
Rated 5 out of
5
by
Nathan S from
Easy to use, works well
Purchased this unit and it's predecessor. They're really easy to use and work well to control the 4 Amp cartridge heaters we're using in the lab. We used the auto tune PID feature, which took about 5 minutes. The user interface is a bit confusing, until you read the manual.
Date published: 2017-04-14
Rated 1 out of
5
by
JohnnyC from
Unit came 3 months late and it will not power up
I ordered this unit back in November and got it end of March. When it finally came, it did not power up. Upon taking with technical support they were not able to find the problem so the unit needs to be returned to be repaired or exchanged, maybe in another 3 months. I am VERY dissapointed.
Date published: 2019-04-01
Rated 4 out of
5
by
besselfunction from
Good Unit. Much Bigger Than Expected
This controller is a definite improvement over its predecessors. We have several CSC32s, and CSi32s in our lab, and this controller is much better. The software is much better than expected, and I definitely prefer using this controller for synthesis. The only issue is the size. This unit is monstrous compared to its predecessors. We use our controllers in fume hoods to control heating mantles, and this unit has to live outside the hood because of space constraints. If they could make this unit in the same form factor as the old units, it would have 5 stars easy.
Date published: 2018-05-24
Rated 1 out of
5
by
PS01 from
Poorly implemented power
When turned on, this unit produces large amounts of radiated electronic noise (from the built in power supply on the internal controller) that interferes with nearby electronic equipment and devices on the same power circuit, it also causes unstable temperature readings. The USB and/or TC inputs do not appear to be properly isolated, as connecting these produce DC shifts in the temperature measurements. Replaced the controller with one with a (properly isolated) external 24v supply and the problem went away, but am left with an $800 controller I can't use.
Date published: 2024-06-06
Rated 5 out of
5
by
Surendranath Lab from
Purchased for electrochemistry at temperature
Excellent instrument, only issue I have is with the software, records time and temperature of the probe without an AM / PM indicator. Had to write a script to convert to military time.
Date published: 2022-01-26