THS-H-M12

M12 Connector 10,000 Ω Thermistor 3-A Sanitary Probes

0.0

(0)

3-A Approved Design, Along With ASME-BPE-2007 Mounting Flange Geometry, Insures Trouble-Free Cleanability and Interchangeabilty
Can Be Used in Sanitary, Hygienic, and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Processes
1/4' Diameter Probe Design for Standard Duty, or
3/8' to 3/16' Stepped Probe Design For Heavy Duty Applications

See Product Overview

THS-H-M12

From ^$ 232.76

Shop Models

9 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 0.2 °C (± 0.36 °F)
Electrical Connection M12 4 pin Female
Probe Diameter 0.25 in
Process Connection Type Tri-Clamp
Process Temperature, Max 150 °C
Process Temperature, Min -80 °C
Sheath Material 316L Stainless Steel
Temperature Sensor Type Thermistor

The 3-A Approved OMEGA™ THS-S-M12 and THS-H-M12 Series Thermistor Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors are manufactured with 316L stainless steel housings that meet the dimensional requirements of ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for easy cleaning.

In addition to the standard 1½-16AMP process connection, these can be provided in the following sizes and styles:

Process Connection	Model Number Code
3/4"-16AMP	-B1-
1" and 1½"-16AMP	-D1-
2"-16AMP	-E1-
2½"-16AMP	-F1-
3"-16AMP	-G1-
4"-16AMP	-H1-

If you need a process connection that is not listed above, please contact our sales department for availability.

The probe stems are manufactured in two configurations; with a standard ¼" diameter probe for standard duty service, and a stepped 3/8" to 3/16" probe design for good response times in heavy duty applications.

The M12 connector allows for easy connection to your instrumentation by means of an optional extension cable. These sensors are also available as RTD sensing styles to accommodate a wide range of process input requirements. In addition to the standard 1½-16AMP mounting flange, this sensor can be provided in a variety of other flange sizes and styles. If you need something a little (or a lot) different, we can accommodate your needs.

This sensor is stocked with the 10,000 ? thermistor standard, but is available in any of the following resistances:

Sensor Code	Resistance @ 25°C	Element Series
2K	2252 ?	44004
3K	3000 ?	44005
5K	5000 ?	44007
10K	10,000 ?	44006
30K	30,000 ?	44008