Welcome to our new website, found an issue or bug? Please report it here
DP20-S1
Panel Meter - 1/8" DIN
Choose a Variant
Data Interface
Control Output
Retransmission Output
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $205.17 |
| 10-24 | $194.91 |
| 25-49 | $184.65 |
| 50-99 | $174.39 |
| 100-499 | $164.14 |
| 500+ | $153.88 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Analog Input Note | 4 to 20 mA, 0 to 10 Vdc (+15 Vdc excitation voltage configurable at terminal 5) |
| Applications | Assembly Line, Control Panel, Laboratories and Scientific |
| Control Output | N/A |
| Data Interface | Modbus RTU |
| Decimal Points | Configurable |
| Digit Size | 14 mm |
| Display Range | -1999 to 9999 |
| Display Type | 3.5 Digit LED |
| Electrical Connection | Screw Terminal |
| Enclosure Ratings | IP65, NEMA Type 4 |
| Form factor | 1/8 DIN |
| Input Type | Thermocouple, RTD, Thermistor, Current, Voltage, DC or AC, Resistance, Frequency |
| Measuring Range | Thermocouple: Type K: -100 to 1350 °C;Type J: -100 to 1200 °C;Type E: -100 to 1000 °C;Type N: -100 to 1300 °C;Type L: -100 to 900 °C;Type R: 0 to 1768 °C;Type S: 0 to 1768 °C;Type T: -100 to 400 °C;Type C: 0 to 2300 °C;Type B: 700 to 1820 °C ;RTD: Pt100(3 wires): 200 to 700 °C ;Pt100(2 wires): 200 to 700 °C ;Pt500: -150 to 630 °C ;Pt1000: -190 to 630 °C ;Ni100: -60 to 180 °C ;Ni200: -60 to 120 °C ;Ni1000: -60 to 180 °C ;Resistance: 0 to 5K: from 9999 to -1999;0 to 50K: from 9999 to -1999;Potentiometers Nominal Value: 500 R to 20 K: from 9999 to -1999;Frequency: 15 Hz to 100 Hz: from 9999 to -1999; Signal Ranges: AC Voltages and AC Currents: 600 Vac, 200 Vac, 20 Vac, 2 Vac, 200 mVac, 60 mVac, 5 Aac, 20 mAac (True RMS measure) (accepts phase-neutral and phase-phase measure) ;DC Voltages and DC Currents: ± 600 Vdc, ± 200 Vdc, ± 20 Vdc, ± 2 Vdc, ± 200 mVdc, ± 60 mVdc, ± 5 Adc, ± 20 mAdc;Refer Tables for more information; Analog Input: 4 to 20 mA, 0 to 10 Vdc |
| Number of Inputs | 1 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | 1 Modbus RTU isolated serial output |
| Power Consumption | 2.5 W |
| Probe Type | Resistive ‘Pt’ Probes: Pt100 with 2 and 3 wires, Pt500, Pt1000 Resistive ‘Ni’ Probes: Ni100, Ni200, Ni1000 Resistive NTC Probes: See table at page 4 Resistive PTC Probes: Families KTY-121, KTY-210 and KTY-220 |
| Reading Rate | 3/sec |
| Resistance Measurement Range | Up to 20 KΩ |
| Response Time | <300 ms. (0 % to 99 % of signal) |
| Retransmission Output | N/A |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor/Transmitter Power | 15 Vdc |
| Span Temperature Drift | 150 ppm/°C |
| Supply Power Note | 18 to 265 Vac/dc (isolated 1500 Veff @ 60 seconds) |
| Supply Power Type | AC/DC |
| Supply Voltage | 18 to 264 Vac/Vdc |
| Thermal Effects | 150 ppm/°C |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L |
| Weight | 150 g |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Bob52 from
Nice meter for the price
My application was to display rpm on a mill, where the speed control produced a 0-10v signal that corresponded to 0-4500 rpm. The DP20 was easy to program for that use and works well. Be aware the case is very thin, and the clamps are plastic so it's not as robust as you might be used to.
Date published: 2018-04-15
Rated 4 out of
5
by
wstein25 from
Does the job but ...
I may be a bit dense about these things, but I found the nested menu/push button configuration complicated. In the end I got the scaling and alarms set up as I needed, but I'm not sure I could explain how I did this. But, in the end it works well as advertised.
Date published: 2018-05-06
Rated 5 out of
5
by
ruf tech from
good display
liked the easy installation. easy to program with only three buttons. easy to see display from a distance. the plastic bracket was a bit flimsy but it did the job.
Date published: 2021-02-08
Rated 4 out of
5
by
Nick I from
Good value part
Decent quality for the cost. Relays are a nice addition.
Date published: 2021-02-04
Rated 4 out of
5
by
scn01 from
works good great value
setup was a small challenge but meter worked as described and has a bright display
Date published: 2018-01-16
Rated 5 out of
5
by
undisclosed from
great product, works as advertised
great product, works as advertised, priced appropriately
Date published: 2024-09-20
Rated 5 out of
5
by
Angela Clark from
Customer Service Specialist
Super fast quoting and super fast shipping. Parts are always in stock.
Date published: 2024-05-21
Rated 5 out of
5
by
Wm Ed from
Panel Meter
I found just what I was looking for with the Omega Engineering DP20-M1 panel meter. Simple installation and easy to configure. For support, Omega Engineering has a very good manual online for this unit which is great.
Date published: 2024-03-21