Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CN08D3-L-AC
CND3 Temperature and Process PID Controller
Choisissez une variante
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$309.54 |
| 10-24 | C$294.06 |
| 25-49 | C$278.59 |
| 50-99 | C$263.11 |
| 100-499 | C$247.63 |
| 500+ | C$232.16 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Altitude,Max | 2000 m |
| Control Mode | PID Control, Fuzzy Control, Self-tune, Manual tuning, On-off control |
| Control Output | Analog Voltage |
| Data Interface | None |
| Display Type | 3.5 Digit LCD |
| Display Type Note | LCD display. Process value (PV): Yellow color, Set point (SV): Green color, 3.5 Digit Dual Display Display Accuracy: 0 or 1 digit to the right of the decimal point (selectable) |
| Form factor | 1/8 DIN |
| Input Type | Thermocouple, RTD, mA, Voltage |
| Measurement Type | Current, Temperature, Voltage |
| Measuring Range | Type K: -200 ~ 1300°C, Type J: -100 ~ 1200°C, Type T: -200 ~ 400°C, Type E: 0 ~ 600°C, Type N: -200 ~ 1300°C, Type R: 0 ~ 1700°C, Type S: 0 ~ 1700°C , Type B: 100 ~ 1800°C, Type L: -200 ~ 850°C, Type U: -200 ~ 500°C, Type TXK: -200 ~ 800°C, RTD (JPt100): -20 ~ 400°C, RTD (Pt100): -200 ~ 850°C, Resistance (Ni120): -80 ~ 300°C, Resistance (Cu50): -50 ~ 150°C, Analog Voltage Input (0~5V): -999~9999, Analog Voltage Input (0~10V): -999~9999, Analog Voltage Input (0~20m A): -999~9999, Analog Voltage Input (4~20m A): -999~9999, Analog Voltage Input (0~50m V): -999~9999 |
| Number of Inputs | 1 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Linear Voltage ;Analog voltage output: 0 ~ 10Vdc;Alarm Output - Relay output: Max. load 250Vac, 3A resistive load |
| Output Signal | None |
| RTD Type | 100 Ω pt or Jpt sensor; 3-wire Pt100 |
| Ramp and Soak | Multiple Ramp & Soak |
| Relative Humidity | 35% ~ 80% RH（non-condensing） |
| Sampling Rate | 10 Hz (10 updates/second) |
| Sampling Rate Note | Analog input: 0.1 sec/scan; Thermocouple or Platinum RTD: 0.1 sec/per scan |
| Shock Resistance | Max. 300m/ s² , 3 times in each 3 axes, 6 directions |
| Storage Temperature, Max | 65 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 80 ~ 260Vac 50/60Hz; 24Vac 50/60Hz ± 10%; 24 Vdc ± 10% |
| Supply Power Type | AC |
| Supply Voltage | 80 to 260 Vac |
| Thermocouple Type | J, K, T, E, N, R, S, B, L, U, TXK |
| Vibration Resistance | 10 to 55Hz, 10m/s² for 10min, each in X, Y and Z directions |
| Voir toutes Spécs | |
PDF et manuels
Logiciels et pilotes
Afficher les notes et les avis
Rated 3 out of
5
by
Dave AGCA from
Outstanding controller, abysmal manual.
This would be a 5+ star product if it weren't for the extraordinarily poor manual. This is a complex controller with a tremendous number of features and settings that can handle very difficult process control problems easily...once you figure out how to use it. Technical support, while very well meaning and committed to helping, was of not much assistance as they also relied on the same manual, and generally suggested "reading the manual" as a way out. I wouldn't have called if I hadn't read the manual. I will admit, that I am old, but I have been using Omega controllers for decades with few problems. The descriptions in the manual for this excellent controller were abysmal.
Date published: 2021-06-26
Rated 1 out of
5
by
qusai from
DONT DO THSI TO YOURSELF!
Extremely hard to program. You don't want to be spending hours just trying to program a simple step heating process and it still not working. Instructions aren't the best. There is no sense of hierarchy in the instruction steps nor a clear description of what each term means.
Date published: 2023-11-14
Rated 5 out of
5
by
West O Beer from
Already purchased a second time
Controller was shipped and received quickly, works perfectly for our temp control at the brewery.
Date published: 2023-09-13
Rated 5 out of
5
by
Ian B from
Capable, Simple, Affordable Controller
Handy little controller that has worked flawlessly so far. Installed to replace the failing electronics in a drying oven and found it easy to adapt to relatively low temperature use with the appropriate limits and alarms. Has brought control temperatures (using the same sensor) within 2C of the setpoint compared to 10C with the older electronics.
Date published: 2022-09-12
Rated 1 out of
5
by
Oyvind from
DON'T
The unit was so hard to program that even with Omega engineers helping/instructing me over the phone I could not get it to work. After 4 calls and about 8 hours on the phone I gave up.
Date published: 2021-03-12
Rated 4 out of
5
by
J Williams from
Great Controller
Great controller but Tech Support thru "Contact Support" on website had little knowledge of how to help with controller functions. Some trial and error, and too much manual reading to make it do what I wanted.
Date published: 2024-06-24
Rated 4 out of
5
by
TimK from
Great programmable controller
This controller is just what I needed to upgrade my existing furnace controller to a controller with program/profile capabilities. It does everything I need it to do for this application. The only drawback is that the buttons are difficult to push, but once set up, this is a minor issue.
Date published: 2023-03-06
Rated 5 out of
5
by
Denise Testa from
Cost Wise
This is a cost wise controller that performs well. Omega is a trusted Company I have used for years.
Date published: 2022-02-01