Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SV230-Series
2-Way, NC, Direct Lift, Brass, Solenoid Valves for Steam
Modèles en stock
- Rated up to 145°C (293°F) Steam
- Rugged NEMA 4 (IP65) Housing
- Mounts in Any Position
- Rated for Continuous Duty
SV230-Series
Depuis
C$
287.11
Modèles en stock
L'aperçu du produit
- Coil Power 22 W
- Duty Cycle 100%
- Enclosure Ratings IP65, NEMA Type 4
- Materials Brass, EPDM
- Materials, Wetted Brass, Copper, EPDM, Stainless Steel
- Media Compatibility Steam
- Media Type N/A
- Mounting Pipe mounting, any direction
- Operating Temperature, Max 50 °C
- Operating Temperature, Min -9 °C
- Process Connection Type NPT Male
- Static Pressure 5 times max psid
- Supply Power Note 22 W, 120 Vac, 50 to 60 Hz, Class H
- Supply Voltage 120 Vac
- Valve Position Normally Closed
- Valve Type Direct Lift
TYPICAL APPLICATIONS:
Heating and Cooling, Commercial Dish Washing Equipment, Car Washing Equipment, Food Processing, Commercial Laundry Equipment, Bottle Washing, Sterilizing Equipment
The SV230 Series valves are designed for low-pressure steam applications in which the valve must operate when the pressure drop across the valve falls into the 0 to 5 psi range. These valves are able to control steam up to 45 psi at 143°C (290°F). All seals are made of ethylene propylene for compatibility with steam over a wide temperature range and for trouble-free, bubble-tight service.
The SV231 through SV235 are direct-lift valves, which combine the features of a direct-acting valve with those of a pilot operated valve. Because of a flexible link between the solenoid plunger and the diaphragm, the direct-lift valve functions as a direct-acting valve at low pressures and as a pilot-operated valve at high pressures. It is sometimes referred to as a zero delta pressure valve or a hung diaphragm valve.
SPECIFICATIONS
Operation: Direct lift
Wetted Parts: Brass, Stainless steel, copper, and seal
Medium: Liquid or gases
Max Static Pressure: 5 times max psid
Ambient Temp: -9 to 50°C (15 to 122°F)
Mounting: Pipe mounting, any direction
Power: 22 W, 120 Vac, 50 to 60 Hz, Class H
Heating and Cooling, Commercial Dish Washing Equipment, Car Washing Equipment, Food Processing, Commercial Laundry Equipment, Bottle Washing, Sterilizing Equipment
The SV230 Series valves are designed for low-pressure steam applications in which the valve must operate when the pressure drop across the valve falls into the 0 to 5 psi range. These valves are able to control steam up to 45 psi at 143°C (290°F). All seals are made of ethylene propylene for compatibility with steam over a wide temperature range and for trouble-free, bubble-tight service.
The SV231 through SV235 are direct-lift valves, which combine the features of a direct-acting valve with those of a pilot operated valve. Because of a flexible link between the solenoid plunger and the diaphragm, the direct-lift valve functions as a direct-acting valve at low pressures and as a pilot-operated valve at high pressures. It is sometimes referred to as a zero delta pressure valve or a hung diaphragm valve.
SPECIFICATIONS
Operation: Direct lift
Wetted Parts: Brass, Stainless steel, copper, and seal
Medium: Liquid or gases
Max Static Pressure: 5 times max psid
Ambient Temp: -9 to 50°C (15 to 122°F)
Mounting: Pipe mounting, any direction
Power: 22 W, 120 Vac, 50 to 60 Hz, Class H
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
bikebandit from
Great Valve
I'm using it in a low pressure application 15 psi saturated steam.
works perfectly so far good flow rate 1/2" npt plumbing doesn't get any easier than that.
this valve is replacing an original that cost more than twice the price and IMHO it's doing a better job
Date published: 2016-06-15