Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SVH-110-Series
2-Way, NO, NC, 316 SS, Low Flow Very High Pressure Solenoid Valves
Modèles en stock
- Stainless Steel Construction
- NEMA 4 and 7
- Pressures up to 10,000 psi (Depending on Model)
SVH-110-Series
Depuis
C$
1,283.07
Modèles en stock
L'aperçu du produit
- Duty Cycle 100%
- Electrical Connection 1/2 NPT female Conduit with Wire Leads
- Electrical Connection Note 1/2 NPT, 457 mm (18") leads
- Enclosure Ratings NEMA Type 4, NEMA Type 7
- Materials 316 Stainless Steel, FEP, 303 Stainless Steel, 302 Stainless Steel, 430 Stainless Steel
- Materials, Wetted 303 Stainless Steel, 316 Stainless Steel, 430 Stainless Steel, FEP
- Media Compatibility Alcohols, Argon, Compatible Gases, Compatible Liquids, Nitrogen, Oils, Water
- Media Type N/A
- Orifice Size N/A
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 204 °C
- Process Temperature, Min -212 °C
- Valve Type Direct Acting
- Weight 48 oz
The SVH-110 Series direct acting solenoid valves are normally closed valves that open when energized and close when de-energized. When the coil is energized the plunger lifts the piston off the valve seat, opening the valve. Upon de-energizing the coil, a spring closes the piston to seat it. The normally open valve operates similarly, closing when energized and opening when de-energized. No minimum pressure is required. The SVH-110 Series are used to control the flow of high pressure air, water, hydrogen, nitrogen and other gases or light liquids compatible with materials of construction. They are also suitable for cryogenic applications.
Specifications
Materials of Construction
Fluid Shipping Weight: 48 oz (3 lb)
Temperature: -212 to 204°C (-350 to 400°F)
Valve Body: 316 SS
Piston/Seal: 303 SS/FEP
O-Ring Seal: FEP
Spring: 302 SS
Plunger: 430 SS
Bonnet: 316 SS/430 SS
Bonnet Retainer: 430 SS
Port Connections: ¼ NPT
Cv: 0.005 (SVH-111), 0.02 (SVH-112)
Electrical
Power: 22 Watts
AC Inrush: 2.5 Amp @ 120 Vac
AC Holding: 0.2 Amp at 120 Vac
Insulation: Class “H”
Duty: Continuous
Enclosure: NEMA 4 and 7(optional)
Connection: ½ NPT, 457 mm (18") leads
Specifications
Materials of Construction
Fluid Shipping Weight: 48 oz (3 lb)
Temperature: -212 to 204°C (-350 to 400°F)
Valve Body: 316 SS
Piston/Seal: 303 SS/FEP
O-Ring Seal: FEP
Spring: 302 SS
Plunger: 430 SS
Bonnet: 316 SS/430 SS
Bonnet Retainer: 430 SS
Port Connections: ¼ NPT
Cv: 0.005 (SVH-111), 0.02 (SVH-112)
Electrical
Power: 22 Watts
AC Inrush: 2.5 Amp @ 120 Vac
AC Holding: 0.2 Amp at 120 Vac
Insulation: Class “H”
Duty: Continuous
Enclosure: NEMA 4 and 7(optional)
Connection: ½ NPT, 457 mm (18") leads
PDF et manuels
Afficher les notes et les avis
Hi! Is the valve CE and UL compliant?
Thanks for your question. Unfortunately no. Our high pressure valves are not CE or UL compliant.
Date published: 2019-11-17
Who is the manufacturer?
thank you for your inquire.
We sell Omega brand products unless otherwise labeled.
This valve is an Omega brand.
Date published: 2022-06-10
It says "coil sold separately" where do we go to find the coils?
Thank you for your inquiry! Despite the description listed the valves do come with the coils
Date published: 2023-04-04