G-Series-3-A

3-A Certified Sanitary Clamp High Temperature Turbine Meters

(0)

Modèles en stock

Meets 3-A Sanitary Standards
Meets CIP, SIP, COP requirements
Meter includes a traditional design
Available in a variety of sizes

Voir l'aperçu du produit

G-Series-3-A

Depuis ^C$ 3,660.43

Modèles en stock

Modèles de boutique

3 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Accuracy ± 0.5 %
Approvals CIP, SIP
Design Type Turbine
Display No Display
Electrical Output 100 to 1000 Hz
Materials, Wetted 300 Stainless Steel, 316 Stainless Steel, CD4MCu Stainless Steel, PEEK
Media Compatibility Liquids
Operating Temperature, Max 107 °C
Operating Temperature, Min -74 °C
Output Detail Choose Magnetic Pickup from Accessories
Process Connection Type Sanitary Clamp
Repeatability ±0.1%

The G-Series High Temperature Sanitary Turbine Flowmeters are volumetric flow measurement devices. The moving fluid is used to turn a rotor, which is suspended in the flow stream. The rotating speed of the rotor is proportional to the fluid velocity or flowrate. As the blades from a spinning rotor pass by a magnetic sensor, an AC voltage pulse is generated and transmitted to the readout instrument. Each pulse is equal to a given volume of liquid therefore “x” number of pulses are equal to a gallon, litre, pound, barrel, etc.

Select a Magnetic Pick-up from The Table

Selection Guide for 1 in. 1-1/2., 2 in. Turbine Meters
Magnetic Pickup type	Part No.	Application	Cable Type
Wire Lead Standard	81003000	Meter mount electronics. Temperature range: -100°F to +250°F. Sine wave output.	None

Herm/High Temp.	81002000	Remote mount electronics. Temperature range: -450°F to +258°F. Sine wave output.	T
High Temp. Standard	81007000	Remote mount electronics. Temperature range: -450°F to +800°F. Sine wave output.	T
Active Digital	81004000	Remote mount electronics. Temperature range: -40°F to +248°F. Square wave, open collector output, 5-32 VDC required. Signal output: 0-10V, NPN	D