Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FMG811
PLASTIC BODIED ELECTROMAGNETIC FLOW METER
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Note | ± 1% of reading (between 10% and 100% of maximum flow) ± 3% of reading (between cutoff and 10% of maximum flow) |
| Battery Size and Type | Alkaline AA |
| Cable Length | 20 ft |
| Conductivity | > 20 µS/cm |
| Display Type | LCD |
| Electrical Connection | M12 5 pin Male |
| Empty Pipe Detection | Hardware/software, conductivity-based |
| Enclosure Ratings | NEMA Type 4X |
| Materials | Aluminum, Polyethylene |
| Materials, Wetted | 316 Stainless Steel, Glass, Polypropylene |
| Media Compatibility | Acid Solutions, Conductive Liquids, Saltwater |
| Number of Digits | 8 |
| Number of Outputs | 1 |
| Operating Pressure, Max | 150 psi |
| Operating Temperature, Max | 54 °C |
| Operating Temperature, Min | -12 °C |
| Output Detail | Current sinking pulse, Opto-isolated, 32 Vdc maximum at 10 mA maximum |
| Output Signal | DC Pulse |
| Pipe Size, Max | 1 in |
| Pipe Size, Min | 1 in |
| Process Connection Note | 1 NPTF, 2 or 3" flange clamps with 2 or 3 NPTF fitting kit |
| Process Connection Size | 1 in |
| Process Connection Type | NPT Female |
| Standard Pulse Rate | 1 unit/pulse out |
| Standard Pulse Rate Note | 1 unit/pulse out, Pulse width of 10 ms depending on unit selection |
| Storage Temperature, Max | 80 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | FMG800: 6 each “AA” alkaline cells (included), replaceable. Estimated life is 1 to 2 years depending on usage, FMG810: 10 to 30 Vdc @ 60 mA maximum (15 mA average), NOTE: Using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation. |
| Supply Power Type | DC |
| Supply Voltage | 10 to 30 Vdc |
| Volumetric Flow Rate, Max | 110 GPM |
| Volumetric Flow Rate, Min | 2.3 GPM |
| Weight | 0 lb |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 4 out of
5
by
85westymmm from
FMG810 does NOT have pulse output
I believe the model numbers (FMG800 and FMG810) are reversed in the description as to which one provides a pulse output. I believe the FMG800 requires a permanent power supply (non-battery operated) but provides a pulse output signal. The battery-operated FMG810 does NOT provide a pulse output.
Date published: 2017-12-28