Skip to search Skip to main content Skip to navigation

Contact

Cliquez et maintenez pour zoomer

SA3

Capteurs de surface RTD avec caoutchouc de silicone autocollant

3,5

(12)

Modèles en stock

Polyimide Carrier
Self-Adhesive Backing
Low Mass Junction Area for Fast Response
Resistant to many Chemicals and Oils

Voir l'aperçu du produit

SA3

Depuis ^C$ 61.47

Modèles en stock

Modèles de boutique

Plus de variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Additional Features 1 None
Cable Diameter 0.04 in
Connector Temperature, Max 180 °C
Connector Temperature, Min -29 °C
Insulation PFA
Insulation Resistance 100 MΩ
Insulation Resistance Note 100 MΩ minimum at 100 Vdc at room temperature and sensor mounted to surface
Junction Type Ungrounded
Process Temperature, Max 260 °C
Process Temperature, Min -17 °C
Sensor Height 0.02 in
Sensor Length 1 in
Sensor Width 0.38 in
Wire Gauge 30 AWG

These thermocouples can be used in outdoor and wet environments, including bright sunlight, with little to no effect on performance or accuracy. Our unique construction techniques provides a fast responding thermocouple junction in a thin and flexible mounting pad. These SA3 thermocouples are available in 2 styles, stripped #30AWG solid leads, or with a miniature color coded connector.

Specifications
Thermocouple: ANSI color code J/K/T/E or IEC color code JI/KI/TI/EI
Accuracy: Special limits of error
Junction Type: Ungrounded sensor construction
• Polyimide tape base with silicone adhesive and paper peel sheet
• Polyimide tape cover
• PFA insulated and jacketed 30 AWG cable
• Glass filled nylon connector when specified
Temperature Range:
Sensor: -17 to 260°C (0 to 500°F)
Connector: -29 to 180°C (-20 to 356°F)
Insulation Resistance: 100 M? minimum at 100 Vdc at room temperature and sensor mounted to surface

PDF et manuels

SA3_spec View More

View Less

Conformité

View Less

passer en revue

Afficher les notes et les avis

3,5

(12)

Rated 1 out of 5 by User from fragile, thin wire and insulation, not robust Fragile, thin wire and insulation, not robust. One wire broke after first use.

Date published: 2020-05-21

Rated 1 out of 5 by gewissler from adhesive did not stick to stainless steel poor adhesive. Did not stick to cleaned stainless steel surfaces. Had to apply anothe layer of fiberglass high heat tape to get them to stay in place.

Date published: 2020-12-02

Rated 5 out of 5 by Anonymous from Self-adhesive thermocouples This tc serves its purpose well! Easy to install but you have to be very careful not to damage it.

Date published: 2020-09-05

Rated 1 out of 5 by Unlikely future customer from False advertisement - very disappointed Even now you picture shows a thermocouple with a yellow connector at the end. I ordered the parts thinking that it was connectorized, but received the TCs with bare wire. Very disappointed in Omega.

Date published: 2020-08-24

Rated 3 out of 5 by MMTF from Fragile If you want to remove and re-apply these thermocouples don't be surprised if junctions break giving false data. For the first application they work well.

Date published: 2024-11-15

Rated 5 out of 5 by N8GR8 from Great product Worked great for the application. Well made and consistent.

Date published: 2024-02-23

Rated 5 out of 5 by Anonymous from Love This Product! Works like a Charm! Need to attach these to a wax surface to go through an investment casting process and study how long the molds take to dry. These self adhesives work fantastic to stick to the mold and I would recommend.

Date published: 2023-06-04

Rated 4 out of 5 by Anonymous from Lab Test Works good in lab test and connects to equipment well.

Date published: 2023-05-22

Self-Adhesive Thermocouples Reviews - page 2

Questions et réponses

Manuals & Downloads

SA3

Capteurs de surface RTD avec caoutchouc de silicone autocollant

In the product details, there is a column called "Minimum Temperature Measurement". The result is in inches.....specifically 36in for the device I ordered. What does that mean?

What is the accuracy of these SA3-J-120-SRTC?

What is the accuracy of the SA3-K-SRTC? What is the response time of the SA3-K-SRTC?

are these well insulated electrically, what if these are pasted on high voltage copper bus bars with voltage up to 500V to 1000V are there any other products that for surface mount application that can be used on copper bsubar with 1000V on it.

What is the accuracy of the SA3-K-120 type thermocouple?

1. what is the accuracy of SA3-J-SRTC? 2. what is the response time of SA3-J-SRTC? 2 seconds or 0.3 seconds? Thank you

I want to measure the metal tube surface temperature inside a tube in shell heat exchanger (undergraduate lab). The environment would be steam/water up to about 120 degrees C. Will the SA3 thermocouples function in this environment? Other suggestions?

Can you get this item already attached to a connector for high temperatures?

SA3

Capteurs de surface RTD avec caoutchouc de silicone autocollant

In the product details, there is a column called &quot;Minimum Temperature Measurement&quot;. The result is in inches.....specifically 36in for the device I ordered. What does that mean?

What is the accuracy of these SA3-J-120-SRTC?

What is the accuracy of the SA3-K-SRTC? What is the response time of the SA3-K-SRTC?

are these well insulated electrically, what if these are pasted on high voltage copper bus bars with voltage up to 500V to 1000V are there any other products that for surface mount application that can be used on copper bsubar with 1000V on it.

What is the accuracy of the SA3-K-120 type thermocouple?

1. what is the accuracy of SA3-J-SRTC? 2. what is the response time of SA3-J-SRTC? 2 seconds or 0.3 seconds? Thank you

I want to measure the metal tube surface temperature inside a tube in shell heat exchanger (undergraduate lab). The environment would be steam/water up to about 120 degrees C. Will the SA3 thermocouples function in this environment? Other suggestions?

Can you get this item already attached to a connector for high temperatures?

In the product details, there is a column called "Minimum Temperature Measurement". The result is in inches.....specifically 36in for the device I ordered. What does that mean?