Series-1800

Compact Low Differential Pressure Switch, 2% Repeatability, UL/CSA/FM Approved

(0)

Modèles en stock

Compact size and repeatability provide a high-value switch for many industrial applications
Designed for panel and wall mounting to easily meet mounting requirements in most industrial settings
Pressure ranges from 0.07 in w.c. to 85 in w.c. make this switch suitable for a wide range of applications

Voir l'aperçu du produit

Series-1800

Depuis ^C$ 163.02

Modèles en stock

Modèles de boutique

9 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Compliance CE, CSA, FM, UL
Compliance Note CE, CSA, FM, UL. Optional-EXPL explosion-proof enclosure does not possess any compliance
Electrical Connection Screw Terminal
Materials, Wetted Consult Factory
Media Compatibility Air, Argon, Carbon dioxide, Helium, Nitrogen, Non-Corrosive Dry Gases
Mounting Orientation Vertical Diaphragm
Operating Temperature, Max 180 °F
Operating Temperature, Min -30 °F
Pressure Type Differential
Process Connection Size 1/8 in
Process Connection Type NPT Female
Proof Pressure Up to 10 psi
Repeatability ± 2%
Set Point Adjustment Internal Screw
Switch Note 15 A @ 120-480 VAC, 60 Hz. Resistive 1/8 HP @125 VAC, 1/4 HP @ 250 VAC, 60 Hz. De-rate to 10 A for operation at high cycle rates
Switch Rating 15 A @ 120-480 Vac, 1/8 HP @ 125 Vac, 1/4 HP @ 250 Vac
Switch Type SPDT NO/NC, Selectable
Weight 595 g

Essential for industrial environments, the Series 1800 Low Differential Pressure Switch for general industrial service combines small size and low price with 2% repeatability for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting the switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved.

CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.

Please see Series AT-1800 for ATEX approved.