Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CDE-440-01T
Choisissez une variante
Conductivity Measurement
Construction Type
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Additional Features 1 | Anti-Corrosion Treatment: Finished with electrostatic epoxy paint |
| Cell Constant | 0.1 |
| Conductivity | 1 μS/cm to 2 S/cm |
| Conductivity Measurement | 0.1 to 20000 μS |
| Conductivity Measurement Note | 0.1 µS to 20 mS, K = 0.1, 0 to 200°C (32 to 392°F), 10 kg/cm^2 |
| Construction Type | Heavy Duty |
| Data Interface | RS485 Modbus |
| Display Mode | Continuous, average or hold |
| Display Type | 2 lines with 16 characters LCD |
| Electrical Output | 5 Outputs (4-20 mA, 2 Normaly open Relay) |
| Enclosure Ratings | IP68, NEMA Type 4 |
| Frequency | 50/60Hz |
| Galvanic Isolation | 2000 Vac |
| Housing Material | Aluminum, ABS |
| Impedance | 600 Ω |
| Insertion Length | 90 mm |
| Measurement Type | Conductivity |
| Operating Temperature, Max | 40 °C |
| Operating Temperature, Min | 5 °C |
| Output Detail | 2 N.O. (1A/240 Vac) on/off alarm or PWM; 4 to 20 mA for PID control or retransmission |
| Power Consumption | 3.5 VA |
| Process Connection Material | 316 Stainless Steel |
| Process Connection Size | 3/4 in |
| Process Connection Type | NPT Male |
| Process Temperature Note | Automatic or Manual Temperature Compensation: 0 to 100°C (32 to 212°F) Temperature Compensation: NTC-R typical 5 Ω at 25°C (77°F |
| Process Temperature, Max | 200 °C |
| Process Temperature, Min | 0 °C |
| Resistance | 10 MΩ |
| Resolution | 0.1 or 0.01 |
| Supply Voltage | 90 to 240 Vac |
| Weight | 1.3 kg |
| Voir toutes Spécs | |
Afficher les notes et les avis