Skip to search Skip to main content Skip to navigation

Contact

CN32PT-220

Platinum Series Versatile High Performance PID Controllers

3,6

(19)

Platinum Series Versatile High Performance PID Controllers

Cliquez et maintenez pour zoomer

Choisissez une variante

Form factor

1/32 DIN 1/16 DIN 1/8 DIN

Data Interface

USB USB, RS232, RS485 Ethernet, RS485, RS232, USB Ethernet, USB

Display Type

4 Digit LED Dual 4 Digit LED 6 Digit LED

Output Signal

None Dual Current, Voltage Current, Voltage

Control Output

Supply Voltage

90 to 240 Vac 12 to 36 Vdc 20 to 36 Vdc

Voir toutes les modèles Voir tous les accessoires

C$481.61

Article# CN32PT-220

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-9	C$481.61
10-24	C$457.53
25-49	C$433.45
50-99	C$409.37
100-499	C$385.29
500+	C$361.21

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 6 semaines

Ajouter à la liste des projets

Voir Les Spécifications

Spécifications du produit

<< Voir toutes les modèles de produits

Brand
A/D Conversion	24-bit sigma delta
Accuracy	Selectable
Accuracy Note	Process Voltage Accuracy: 0.03% Process Current Accuracy: 0.03% Thermocouple Accuracy: Type J: 0.4°C (0.7°F) Type K: 1.0°C (1.8°F), 0.4°C (0.7°F) Type T: 1.0°C (1.8°F), 0.4°C (0.7°F) Type E: -1.0°C (1.8°F), 0.4°C (0.7°F) Type R: 1.0°C (1.8°F), 0.5°C (0.9°F) Type S: 1.0°C (1.8°F), 0.5°C (0.9°F) Type B: 1.0°C (1.8°F), 0.5°C (0.9°F) Type C: 0.4°C (0.7°F) Type N: 1.0°C (1.8°F), 0.4°C (0.7°F) RTD Accuracy: Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: 0.3°C (0.7°F) Pt, 0.003916, 100 Ω: 0.3°C (0.7°F) Pt, 0.00392, 100 Ω: 0.3°C (0.7°F) Thermistor Accuracy: 2252 Ω: 0.2°C (0.35°F) 5K Ω: 0.2°C (0.35°F) 10K Ω: 0.2°C (0.35°F)
Additional Features 1	Programmable 3 Color Display
Approvals	UL, cUL, CE, UKCA
CMRR	120 dB
Control Mode	Ramp and Soak, Autotune, Adaptive Tune, PID Control, On-off control, Alarms, Remote Setpoint
Control Output	2 SSR Relay
Current, Max	4 to 20 mA, 0 to 24 mA scalable
Cutout Dimensions	22.5 x 45 mm
Data Interface	USB
Data Interface Note	Connection: USB: Female micro-USB Ethernet: Standard RJ45 USB: USB 2.0 host or device Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T autoswitching, TCP/IP, ARP, HTTPGET
Digital Filter	Programmable
Display Size	46 mm (1.8 in)
Display Type	4 Digit LED
Display Type Note	4-digit, 9-segment LED Display
Electrical Connection	USB Micro-B Female
Enclosure Ratings	IP65, NEMA Type 4X
External Fuse Required	External Fuse Required: Time-Delay, UL 248-14 Listed: 100 mA/250 V; 400 mA/250 V (low voltage option) ; Time-Lag, IEC 127-3 Recognized: 100 mA/250 V; 400 mA/250 V (low voltage option)
Form factor	1/32 DIN
Height	25.4 mm
Impedance Input	Input Impedances: Process/Strain: 10M Ω for ± 100 mV, 1M Ω for other voltage ranges; Process Current: 5 Ω; Thermocouple: 10K Ω max ; Auxiliary Input (Remote Setpoint): 3.5K Ω for 0 to 10V, 50K Ω for 0 to 1V, 50 Ω for current
Input Configuration	Differential
Input Type	Thermocouple, RTD, Thermistor, mA, Voltage, Strain
Input Voltage	-100 to 100 mV, -1 to 1 Vdc, -10 to 10 Vdc
Isolation	ISOLATION Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option) Power to Relays/SSR Outputs: 2300 Vac per 1 min test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test
Length	127 mm
Line Power	4 W
Line Voltage	90 to 240 Vac ± 10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage
Low Voltage	12 to 36 Vdc
Measurement Type	Current, Strain, Temperature, Voltage
Measuring Range	Process Voltage: ± 50 mV, ± 100 mV, ± 1, ± 10 Vdc Process Current: Scalable within 0 to 24 mA Thermocouple: Type J: -210 to 1200°C Type K: -270 to -160°C, -160 to 1372°C Type T: -270 to -190°C, -190 to 400°C Type E: -270 to -220°C, -220 to 1000°C Type R: -50 to 40°C, 40 to 1788°C Type S: -50 to 100°C, 100 to 1768°C Type B: 100 to 640°C, 640 to 1820°C Type C: 0 to 2320°C Type N: 250 to -100°C, -100 to 1300°C RTD: Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: -200 to 850°C Pt, 0.003916, 100 Ω: -200 to 660°C Pt, 0.00392, 100 Ω: -200 to 660°C Thermistor: 2252 Ω: -40 to 120°C 5K Ω: 30 to 140°C 10K Ω: 20 to 150°C
Number of Control Outputs	2
Number of Inputs	1
Operating Temperature, Max	50 °C
Operating Temperature, Min	0 °C
Output Detail	2 Solid State Relay Outputs;Action: Reverse (heat), direct (cool), or heat/cool Auto-Tune: Operator initiated from front panel Adaptive Tune: User selectable; fuzzy logic continuous PID tuning optimization Control Modes: ON/OFF or the following time/amplitude proportional control modes; selectable manual or auto PID, proportional, proportional with integral, proportional with derivative Cycle Time: 0.1 to 199 seconds
Output Signal	None
Polarity	Bipolar
Power Consumption	5 VA
RTD Type	100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385, 0.00392 (100 Ω only), or α=0.003916 (1000 Ω only)
Ramp and Soak	Profiling
Relative Humidity	90% RH, non-condensing
Remote Setpoint	Current, Voltage
Resolution	0.1° temperature; 10 µV process
Sampling Rate	20 Hz (20 updates/second)
Set Point Adjustment	Menu Configurable
Supply Power Note	90 to 240 Vac ± 10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage.Line Power: 4W, Low Voltage: 12 to 36 Vdc; Low Power: 3W.Low Voltage/Power Option: External power source must meet Safety Agency Approvals; units can be powered safely with 24 Vac power, but no certification for CE/UL is claimed; Excitation Voltage Note- Firmware selectable (no jumpers to set) to 5, 10, 12, and 24 Vdc @ 25 mA
Supply Power Type	AC
Supply Voltage	90 to 240 Vac
Temperature Stability	Temperature Stability:RTD: 0.04°C/°C;Thermocouple @ 25°C (77°F): 0.05°C/°C (cold junction compensation);Process/Strain: 50 ppm/°C
Thermistor Type	2252 Ω, 5K Ω, 10K Ω
Thermocouple Type	J, K, T, E, R, S, B, C, N
Warm-Up to Rated Accuracy	30 min
Weight	127 g
Width	48 mm
Voir toutes Spécs Montrer moins

PDF et manuels

CNPT-Series_spec CNPT-Series View More

View Less

Logiciels et pilotes

cnpt_series_software_zip_software_downloads View More

View Less

Conformité

View Less

Reviews

Afficher les notes et les avis

3,6

(19)

Rated 5 out of 5 by no0ne from Great technical support We have put this to use. The technical support is what allowed us to put this into use quickly.

Date published: 2017-03-20

Rated 1 out of 5 by Bcarlton from Very difficult to use THS S HW YU PRGM AN OMGA CNTRLR. This is 2017. Why does the 'Platinum' temp controller have a 1980s user interface? The USB port is an afterthought in a terrible location. It would not stay connected to my computer. The software does not run in Windows 10, and is not supported by Omega. Omega makes a lot of good products, but this is not one of them. We sent the unit back.

Date published: 2017-02-19

Rated 1 out of 5 by quantum from A nightmare to control from a computer The device itself might be ok but it was a nightmare to control it from a computer. Prepare to get head-hakes. The technical documentations are poorly written, very difficult to understand and filled with errors. It required a lot of of time and trials/errors to understand which commands and parameters to send. It was more like reverse engineering the communication protocol than using it ! What a lost of time. For some unknown reason, several "Omega ASCII protocol" commands didn't work. So don't use it. Their Modbus LabVIEW examples are buggy. Looks like a summer student wrote them. What a joke. And absolutely no answer from the technical support. Nothing. What a shame.

Date published: 2021-05-21

Rated 3 out of 5 by ProcEng from Works, but not without issues Bought two controllers and ran into issues with both, readings jumped all over the place during testing. Opened up the controller and found that the input board wasn't mounted onto the main board properly for both, wasted a good amount of time trying to troubleshoot. Once I re-seated the internal board it worked as intended.

Date published: 2018-06-07

Rated 5 out of 5 by RalphBSz from Best controller I have a handful of the older i16 and i32 controllers in use already, and am replacing two of those with pt32 (one done, one in progress). The i32 were already very good, with useful features, although a somewhat clunky setup interface (the 4-button menus could make grown men cry). Reliability has been perfect. Communication was a bit of an issue, required going to the larger 1/16 DIN model in some cases. The pt32 has fixed all that. Even when using the four buttons, the setup is now more logical. But the sane way to set them up is to connect them to a laptop and configure them with the Platinum program. Being able to upload and download configurations means that I can finally put the configurations under revision control, and check that the device installed in the system is actually configured correctly. I can also modify configurations offline, without taking the control system down, and then quickly upload them in a quick downtime. Once you have a configuration, it can be quickly adjusted by editing the txt file directly. All very very convenient. With the USB port, the communication problem has been solved. Find something with a USB connector nearby (laptop, industrial controller), either write a few lines of Python or install LabView, and you can chat with the controller. I'm now using the controller as an A-D converter for computer analysis of the process too. Very cool, low cost, convenient. Speaking of cost: The Newport/Omega controllers have never been cheap, but worth their price. If you need a simple low-feature controller, buy something else. The few times I've talked to tech support (in Santa Ana), they've been very helpful, patient, and knowledgeable. My only complaint is: In one case I need four setpoints and four outputs from a single input; while it is theoretically possible to get this many outputs (not clear it can be ordered in a 1/32 DIN, that would be model -444-776), there are not four setpoints available. So this needs to be handled by using two controllers. Expensive, but works great.

Date published: 2017-10-27

Rated 3 out of 5 by grumpy engineer from OK OK unit. Omega missed ship date by weeks. PC configuration software didn't work without lots of futzing around. LED display is straight out of the 90's. But, works well once configured, build quality looks good, optimistic about reliable performance. Having two PID loops in one controller is nice too.

Date published: 2020-11-25

Rated 4 out of 5 by Jacky from Good product. but need to improve usability. Need better software for monitor and control the controller. we also want there are easier way that we can export process values to further analysis

Date published: 2016-02-11

Rated 5 out of 5 by Mario Zorrilla from CNPT 1/32 and 1/16 I have used the 1/32 and 1/16 CNPT controllers, and these have proven to be very robust. What I like the most is the possibility to communicate to a PC because I mostly use LabView for integrating them and automating a process

Date published: 2024-07-03

Platinum Series Versatile High Performance PID Controllers Reviews - page 2