Skip to search Skip to main content Skip to navigation

Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.

CYC325

Dual Channel Autotune Temperature Controllers

C$10,766.25

Article# CYC325

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-4 C$10,766.25
5-9 C$10,227.94
10-24 C$10,012.61
25-49 C$9,581.96
50-99 C$9,366.64
100+ C$9,151.31

En stock

Délai de livraison (si pas en stock): 8 semaines

Spécifications du produit

<< Voir toutes les modèles de produits
Brand
A/D Conversion 24-bit
Accuracy Selectable
Accuracy Note

PTC RTD (0 to 500 Ω : Range) : ± 0.004 Ω, ± 0.01 % of rdg

PTC RTD (0 to 5000 Ω : Range) : ± 0.004 Ω, ± 0.02 % of rdg

NTC RTD (0 to 7500 Ω : Range) : ± 0.1 Ω, ± 0.04 % of rdg

Thermocouple (± 25 mV) : ± 1 µV,± 0.05 % of rdg

Thermocouple (± 50 mV) : ± 1 µV,± 0.05 % of rdg

Approvals CE Mark
Baud Rate 9600 to 57600
Control Characteristics

PID Control Settings:

  • Proportional (Gain): 0 to 1000 with 0.1 setting resolution
  • Integral (Reset): 1 to 1000 (1000/s) with 0.1 setting resolution
  • Derivative (Rate): 1 to 200% with 1% resolution

Manual Output: 0 to 100% with 0.01% setting resolution

Zone Control: 10 temperature zones with P, I, D, manual heater out, and heater range

Setpoint Ramping: 0.1 K/min to 100 K/min

Safety Limits: Curve temperature, power up heater off, short circuit protection

Control Output Heater
Control Type Manual Heater Output, Open Loop, PID Control
Data Interface RS232
Digital Connector Type 9 pin Sub-D
Display Annunciators Autotune, Control input, Remote
Display Measuring Units °C, K, mV, V
Display Size 5.5 mm Digits
Display Type LCD
Display Type Note

Display: 2-line, 20-character, liquid crystal display with 5.5 mm (0.216”) character height

Display Update Rate: 2 rdg/s

Other Displays: Setpoint, heater range, and heater output; user selected

Electrical Connection Ceramic Isothermal Block
Filter Averages 2 to 64 input readings
Form factor Benchtop
Front Panel Display Readings 1 to 4
Heater Output Display Percentage of full power or current
Heater Output Resolution 0.01
Height 89 mm
Input Type Thermocouple, RTD, Thermistor
Input Type Note Temperature, sensor units Input Configuration: Each input is factory configured for either diode/RTD or thermocouple
Interface Features IEEE-488 Interface Features: SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT0, C0, E1
Isolation Sensor inputs optically isolated from other circuits but not each other
Keypad 20-key membrane, numeric and specific functions
Length 368 mm
Loops Control Loops : 2
Measurement Type Temperature
Number of Control Outputs 2
Number of Inputs 2
Operating Temperature, Max 35 °C
Operating Temperature, Min 15 °C
Output Detail 2 Heater output
Output Signal None
Power Consumption 6 W
RTD Type 4-lead differential With 6-Pin DIN Connector
Resolution Sensor dependent, refer to input specifications table
Sampling Rate 10 Hz (10 updates/second)
Sampling Rate Note To 10 rdg/s on each input
Sensor Input Configuration

Measurement Type: 4-lead differential

Excitation: Constant current with current reversal for RTDs Supported

Sensors: Diodes, silicon, GaAlAs; RTDs, 100 Ω Platinum, 1000 Ω Platinum, germanium, carbon-glass, CernoxTM, and RoxTM Standard Curves: CY7 and CY670, PT-100, PT-1000, RX-102A, RX-202A

Input Connector: 6-pin DIN

Sensor Units Display Resolution Sensor dependent up to 5 digits
Setpoint Setting Resolution Same as display resolution (actual resolution is sensor dependent)
Settable Parameters Curve Entry, Keypad Lock-out
Software Support LabVIEWTM driver; consult factory for availability
Supply Power Note Standard 120 Vac, optional 240 Vac, 6%, -10%, 50 or 60 Hz, 85 VA
Supply Power Type AC
Supply Voltage 100 to 240 Vac
Temp Display Resolution 0.001° from 0 to 99.999°, 0.01° from 100 to 999.99°, 0.1° above 1000°
Thermocouple Type E, K, T, AuFe 0.07% vs Cr, AuFe 0.03% vs Cr
Tuning Autotune, PID, PID zones
Update Rate, Max 10 rdg/s on each input (except 5 rdg/s on input A when configured as thermocouple)
Weight 4 kg
Width 216 mm
Voir toutes Spécs Montrer moins
Dual Channel Autotune Temperature Controllers CYC325 CYC325
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 2ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
fr-CA
fr
Enregistrer la configuration