Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LVU826
Non-Contact Loop Powered Ultrasonic Level Transmitter
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 0.2 % |
| Beam Width | 3 in |
| Compliance | CE |
| Configuration | Push button |
| Display | lcd |
| Display Measuring Units | cm, in, % |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP65, NEMA Type 4X |
| Height | 5.5 in |
| Length | 5.2 in |
| Loop Resistance | 500 Ω @ 24 Vdc |
| Materials | FKM, Fluoroelastomer, PC, ABS, Polyvinylidene Fluoride |
| Measuring Range, Max | 26.2 ft |
| Measuring Range, Min | 8 ft |
| Media Compatibility | Alkaline solutions, Dilute Acids, Hydraulic Oil, Light Oil, Oil, Solvents, Water, Water-based fluids |
| Memory | Non - Volatile |
| Number of Digits | 6 |
| Number of Wires | 2 |
| Operating Pressure, Max | 30 psi |
| Operating Temperature, Max | 71 °C |
| Operating Temperature, Min | -40 °C |
| Output Signal | Current |
| Process Connection Size | 2 in |
| Process Connection Type | NPT Male |
| Process Temperature, Max | 60 °C |
| Process Temperature, Min | -20 °C |
| Resolution | 0.039 in |
| Signal fail-safe | 4 mA, 20 mA, 21 mA, 22 mA or hold last |
| Temperature Compensation | Automatic |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 4 out of
5
by
Ronald Smith from
Great little unit
Small footprint, easy to program, accurate, dependable
Date published: 2016-10-06
Rated 5 out of
5
by
Mike K from
Great Level Transmitter
Excellent instrument for a modest cost.
Easy to setup
Good repeatability.
Date published: 2021-09-29
Rated 4 out of
5
by
wolfebrand from
Simple, dependable level transmitter
We have been using these Omega Level sensors for more than 10 years now. I like them because they are simple to use and install, work well for our application, they tend to be pretty dependable as well as accurate, to within about 1/4" the best I can tell.
We use them to monitor liquid chlorine bleach (Sodium Hypochlorite) in a 1,100 and 2,000 gallon plastic tanks.
Date published: 2021-02-01
Rated 5 out of
5
by
Anonymous from
V-notch weir measurement
We use this to measure the depth of water for a v-notch weir on a Fluid Metering experiment in Chemical Engineering. The V-notch weir is an ancient way of measuring water and is taught to show the evolution of water measurement. The original one I bought from Omega had a loose wire from 8 years of use and the measurements made no sense. I bought this model again as it works great for our needs.
Date published: 2020-09-23