Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LVU800-Series
Dual Ultrasonic Non-Contact Integral Liquid Level Switch with Very Small Sensor
Modèles en stock
- Simple, Fast Setup with Pushbutton Calibration and LCD Display
- Four Measurement Ranges Available up to 10 m (32')
- 6-segment LCD Display Indicates Air Gap or Liquid Level (Inch or Centimeter Units)
- 5 cm (2') Minimum Beam Width for Applications with Restricted Space
LVU800-Series
Depuis
C$
1,281.43
Modèles en stock
L'aperçu du produit
- Accuracy ± 0.2 %
- Compliance CE
- Configuration Push button
- Display lcd
- Display Measuring Units cm, in, %
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP65, NEMA Type 4X
- Height 5.5 in
- Length 5.2 in
- Loop Resistance 500 Ω @ 24 Vdc
- Materials FKM, Fluoroelastomer, PC, ABS, Polyvinylidene Fluoride
- Media Compatibility Alkaline solutions, Dilute Acids, Hydraulic Oil, Light Oil, Oil, Solvents, Water, Water-based fluids
- Memory Non - Volatile
- Number of Digits 6
- Number of Wires 2
- Operating Pressure, Max 30 psi
- Operating Temperature, Max 71 °C
- Operating Temperature, Min -40 °C
- Output Signal Current
- Process Temperature, Max 60 °C
- Process Temperature, Min -20 °C
- Signal fail-safe 4 mA, 20 mA, 21 mA, 22 mA or hold last
- Temperature Compensation Automatic
The LVU800 Series general purpose 2-wire ultrasonic transmitter provides non-contact level measurement up to 10 m (32'), and is ideally suited for challenging ultrapure, corrosive or waste liquids. Pushbutton calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include wastewater and sodium hydroxide.
SPECIFICATIONS
Range:
LVU809: 10 cm to 3 m (4" to 9.8')
LVU816: 20 cm to 5.5 m(8" to 18')
LVU826: 20 cm to 8 m(8" to 26.2')
LVU832: 30 cm to 10 m(12" to 32.8')
Accuracy: ± 0.2% of span
Resolution:
LVU809: 0.5 mm (0.019")
LVU816/826: 1 mm (0.039")
LVU832: 2 mm (0.078")
Beam Width:
LVU809: 5 cm (2") dia.
LVU816/LVU826/LVU832: 7.6 cm (3") dia.
Deadband:
LVU809: 10 cm (4")
LVU816: 20 cm (8")
LVU826: 20 cm (8")
LVU832: 30 cm (12")
Display Type: LCD, 6-digit
Display Units: Inch, cm or percent
Display Mode: Air gap or liquid height
Memory: Non-volatile
Supply Voltage: 12 to 28 Vdc
Loop Resistance: 500 O @ 24 Vdc
Signal Output: 4 to 20 mA, 2-wire
Signal Invert: 4 to 20 mA or 20 to 4 mA
Calibration: Push button
Fail-Safety: Selectable 4 mA, 20 mA, 21 mA, 22 mA or hold
Process Temperature: -20 to 60°C (-7 to 140°F)
Temperature Compensation: Automatic
Electronics Temperature:n -40 to 71°C (-40 to 160°F)
Pressure: 30 psi (2 bar) @ 25°C, derated @ 1.667 psi (0.113 bar) per above 25°C
Enclosure Rating: NEMA 4X (IP65)
Enclosure Vent: Watertight membrane
Enclosure Material: PC/ABS FR
Transducer Material: PVDF
Process Mount:
LVU809: 1 NPT or 1"G
LVU816/LVU826/LVU832: 2 NPT or 2" G
Mounting Gasket: FKM
Conduit Entrance: Dual, 1/2 NPT
Classification: General purpose CE compliance EN 61326 EMC
SPECIFICATIONS
Range:
LVU809: 10 cm to 3 m (4" to 9.8')
LVU816: 20 cm to 5.5 m(8" to 18')
LVU826: 20 cm to 8 m(8" to 26.2')
LVU832: 30 cm to 10 m(12" to 32.8')
Accuracy: ± 0.2% of span
Resolution:
LVU809: 0.5 mm (0.019")
LVU816/826: 1 mm (0.039")
LVU832: 2 mm (0.078")
Beam Width:
LVU809: 5 cm (2") dia.
LVU816/LVU826/LVU832: 7.6 cm (3") dia.
Deadband:
LVU809: 10 cm (4")
LVU816: 20 cm (8")
LVU826: 20 cm (8")
LVU832: 30 cm (12")
Display Type: LCD, 6-digit
Display Units: Inch, cm or percent
Display Mode: Air gap or liquid height
Memory: Non-volatile
Supply Voltage: 12 to 28 Vdc
Loop Resistance: 500 O @ 24 Vdc
Signal Output: 4 to 20 mA, 2-wire
Signal Invert: 4 to 20 mA or 20 to 4 mA
Calibration: Push button
Fail-Safety: Selectable 4 mA, 20 mA, 21 mA, 22 mA or hold
Process Temperature: -20 to 60°C (-7 to 140°F)
Temperature Compensation: Automatic
Electronics Temperature:n -40 to 71°C (-40 to 160°F)
Pressure: 30 psi (2 bar) @ 25°C, derated @ 1.667 psi (0.113 bar) per above 25°C
Enclosure Rating: NEMA 4X (IP65)
Enclosure Vent: Watertight membrane
Enclosure Material: PC/ABS FR
Transducer Material: PVDF
Process Mount:
LVU809: 1 NPT or 1"G
LVU816/LVU826/LVU832: 2 NPT or 2" G
Mounting Gasket: FKM
Conduit Entrance: Dual, 1/2 NPT
Classification: General purpose CE compliance EN 61326 EMC
PDF et manuels
Afficher les notes et les avis
you · a few seconds ago we want to purchase level transmitter for use on caustic closed tank and HNO3 Closed tanks. please suggest us the model which is compatible to these liquids. range of tanks are upto 5meters.
Thank you for your interest in this product. Please email flow@omega.com and will address it with additional questions required.
Date published: 2023-07-18
the water in the tank we plan on monitoring is 85C. I noticed it lists maximum ambient temperature is 60C. Any thoughts on whether that might be a problem?
Thank you for your inquiry and unfortunately, the electronics will be affected with the higher temperatures mentioned and the sensor will not output any readings.
Date published: 2023-07-19