Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OM-AMU
Fiberglass Enclosure Solid/Clear Cover, NEMA3R/4X Indoor/Outdoor
Modèles en stock
- Suited for Higher Temperatures or Corrosive Environments
- Protect Controls and Components Indoors or Outdoors
- UL 94 Flammability Rating
- UV Stabilized for Outdoor Use
OM-AMU
Depuis
C$
158.48
Modèles en stock
L'aperçu du produit
- Enclosure Material Fiberglass
- Enclosure Ratings CSA Type 1, CSA Type 12, CSA Type 13, CSA Type 2, CSA Type 3, CSA Type 3R, CSA Type 4, CSA Type 4X, IEC Type: IP66, NEMA Type 1, NEMA Type 12, NEMA Type 13, NEMA Type 2, NEMA Type 3, NEMA Type 3R, NEMA Type 4, NEMA Type 4X, UL Type 1, UL Type 12, UL Type 13, UL Type 2, UL Type 3, UL Type 4, UL Type 4X
- Operating Temperature, Max 130 °C
- Operating Temperature, Min -35 °C
- Works With Electrical Controls and Components
OM-AMU series non-metallic fiberglass enclosures are designed to insulate and protect electrical controls and components in both indoor and outdoor applications and are especially well suited for higher temperatures and corrosive environments. These NEMA 3R and NEMA 4X (IP66) fiberglass JIC size junction boxes feature raised covers with a variety of latching options that allow you to provide the level of security or ease of access needed for each application. The OM-AMU series electrical enclosures have molded-in hinges with removable stainless steel hinge pins.
Construction
Service Temperature Rating: -35 to 130°C (-31 to 266°F)
Standards: UL Types 1, 2, 3, 4, 4x, 12 and 13; CSA Types 1,2,3,3R, 4 4X, 12 and 13; NEMA Types 1, 2, 3, 3R, 4, 4X, 12 and 13; IEC Type IP66
UL and CSA listed type 6P and IEC60529 type IP68: Models with solid and clear covers (without viewing window) , 14 x 12 x 6 and smaller with 4 screw closure, are submersible up to 24 hours at a depth of 6 feet (1.8m).
Construction
- Fiberglass Reinforced Polyester Formulation
- Tongue and Grove, Closed Cell Neoprene Seal Designed for Nema Type 4X Rating
- Molded-In Hinge and Latch Keeper Designs Eliminate Wall Penetrations
- Factory Installed Durable Polycarbonate Mounting Flange
- 304 SS Hardware
- Lift-Off Cover with Four Screws
- Molded-In Hinge on One Side with 2 Screws on the Opposite Side
- Padlocking Snap Latch or Twist Latch with Molded-In Hinge
Service Temperature Rating: -35 to 130°C (-31 to 266°F)
Standards: UL Types 1, 2, 3, 4, 4x, 12 and 13; CSA Types 1,2,3,3R, 4 4X, 12 and 13; NEMA Types 1, 2, 3, 3R, 4, 4X, 12 and 13; IEC Type IP66
UL and CSA listed type 6P and IEC60529 type IP68: Models with solid and clear covers (without viewing window) , 14 x 12 x 6 and smaller with 4 screw closure, are submersible up to 24 hours at a depth of 6 feet (1.8m).
PDF et manuels
Afficher les notes et les avis