Fittings Note
Compatible With SSLK
and BRLK Compression
Fittings
Probe Type
General Purpose Thermistor Probes
Process Temperature, Min
-80 °C
Sheath Material
304 Stainless Steel
Temperature Probe Style
Immersion Probe
Temperature Sensor Type
Thermistor
Thermistor Resistance Temperature, Max
70 °C
Thermistor Resistance Temperature, Min
0 °C
Wire Type
Stranded
This TH-10 Series general purpose thermistor probes have a stainless steel sheath sealed at the tip for direct immersion into process liquids. The straight sheath design, with 40 inches of extension cable, adapts well to use with a wide variety of transition fittings. This design makes for a more compact probe when space limitations are a factor. For a straight sheath with strain relief spring and transition, see the TJ36-44000 series probe.
Thermistor resistances of 5,000 and 10,000 ohms are standard with 2,252, 3,000 and 30,000 ohm resistances available. Standard interchangeability is ± 0.2°C, with an optional interchangeability of ± 0.1°C available.
Rated 5 out of
5 by
Kasra from
EngineerGot delivered very fast. Very Accurate measurement
Date published: 2024-05-28
Rated 4 out of
5 by
Tim B from
Good Product with Room for ImprovementThis part meets almost all of our expectations. They give you plenty of cable to work with. Personally, we cut the cable to about 8 inches of length and put a connector on it for easy replacement. The only downside is there's no strain relief at the probe to cable transition. Our wire got bent back and forth several times over the course of a month and broke off. This kind of damage can not be fixed, requiring us to buy a new part. Overall, great product. Only improvement would be adding strain relief to the transition to prevent failure like this.
Can the unit be provided with 1/8" dia tube and a 44018 thermisor ?
Asked by: Anonymous
Thank you for your inquiry Anonymous. Due to the complexity of your questions, please contact our Temperature Department at 1-800-622-2378, ask for Temperature Engineering or temp@omega.com for further assistance.
Answered by: Application Engineer MC
Date published: 2023-07-06
Recommend replacement for TH-10-44007-1/4-2-40 Thermistor?
Asked by: North
Thank you for your inquiry. The closest replacement for this product is the TH-10-44007-1/8-2-40: https://www.omega.com/en-us/temperature-measurement/temperature-probes/probes-with-lead-wires/th-10-44000/p/TH-10-44007-1-8-2-40
Answered by: Application Engineer MC
Date published: 2024-02-23
Can a NIST traceable certificate be provided with this sensor?
Asked by: Automation Engineer
Thank you for your inquiry Automation Engineer. This sensor does not come with a NIST certificate. Please send a quote requesting this sensor with calibration from sales@omega.com
