1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
TJ36-FG
Fine Diameter (0.01 in to 0.04 in) Rugged Thermocouple Transition Joint Probes
Modèles en stock
- Diameters as small as 0.25mm (0.010') !
- Probes Available in E, J, K, N, and T Calibrations
- 304 SS and Inconel® 600 sheaths
- Additional Sheaths Available: 310 SS, 316 SS, 321 SS and Super OMEGACLAD™ XL
TJ36-FG
Depuis
C$
83.66
Modèles en stock
Vous ne trouvez pas le bon modèle ?
Utilisez notre configurateur personnalisé pour affiner votre produit
L'aperçu du produit
- Insulation Note Type K and N Can be Manufactured with Super OMEGACLAD® XL Compacted Mineral Insulation Cable for Long-Lasting Performance in Harsh Conditions
- Number of Connectors N/A
- Process Temperature, Max 700 °C
- Process Temperature, Min 0 °C
- Temperature Sensor Type Thermocouple
- Wire Type Stranded
Probes less than 48 inches in length are shipped 'straight'. Probes equal to or greater than 48 inches in length are shipped 'coiled'. If a probe that is 48 inches or longer must ship straight, please add "-SST" to the end of the part number, and add $75.00 to the price of the probe. Maximum ship straight length is 96 inches. Additional shipping fees from carrier may also apply for non-standard length packaging.
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Scott E from
Everything received and working as expected.
Reliable company with reliable products. Works like a charm!
Date published: 2024-04-04
Rated 5 out of
5
by
Scott E from
Great company with great products.
Everything works as expected. Received everything as expected.
Date published: 2024-04-04
Rated 1 out of
5
by
Anonymous from
Wrong reference
It is too long and too thin, I send pictures and request a quote whit a previous reference, but the reference that your teem gave me wasn't correct
Date published: 2020-09-11
Rated 5 out of
5
by
customdaveus from
0.01" fine wire T/C for speedy measurements
We use the 0.10" fine wire t/c for testing the temperature reaction time of of thermal sensing shower valves to measure the speed of the reaction time in the milliseconds.
Date published: 2020-04-10
Rated 4 out of
5
by
sully from
nice coupler great for our application.
the only problem i had was it needed to go into the side of a hot block had to bend the probe about 90' and the first one cracked.i was able to install the second one at less of an angle it was fine.
Date published: 2017-08-14
What would the transition joint diameter be for the TK36-CASS-020G-2? Could I use a thermocouple compression fitting on this? Would omegalok work for that?
Thank you for your inquiry DerekJ. The transition joint diameter is 1/4". Yes you can use compression fittings with this probe.
Date published: 2022-12-03
Over what distance at the tip does this measure temperature for this model?
The thermocouple junction is at the tip of the probe. Within the first 0.5 inch the temperature is being taken.
Date published: 2021-01-15
What is the overall length (excluding wires) of TK36-CASS-020G-2?
Thank you for your inquiry CalebK. The length of the probe is 2". The transition joint is 2.25"
Date published: 2022-12-03
In reference guide, upper temperature limit table indicates the upper temperature limit of T-TC (24AWG, 0.020 in) is 200 C. This website shows the upper temperature limit of TJ36-CPSS-020U-6 is 260 C. Which is correct?
Thank you for your inquiry. TJ36-CPSS-020U-6 has MgO Insulation that allows for higher upper temperature.
Date published: 2022-09-30
I'm looking for a thermocouple with the highest accuracy possible (range of temp from 0 to 40°C) and a 0.01" probe diameter. What is the best thermocouple for this ?
Thank you for your inquiry. We need more information in order to provide a product. Please email your request to temp@dwyeromega.com that way one of our engineers can advise.
Date published: 2024-04-06
Hello, is this probe able to be bent to a 90 degree configuration? If so, what bend radius would be achievable? My application has a very small space to operate in.
Thank you for your inquiry. Bending Metallic Sheathed Thermocouples: The Minimum Bend RADIUS Should be NO LESS than THREE TIMES the diameter of the probe being bent.
Date published: 2023-10-13