Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
G2-Series-GP
G2-Series General Purpose Indicating Flow Meters & Transmitters
Modèles en stock
- Meter is designed for thin fluids < 100 cP
- 2 Totals (Batch Total = Resettable, Total = Non-Resettable) Rate of Flow
- Internal parts are simple to replace for easy maintenance
- Indication Only, Indication and Pulse, Indication Pulse & Current Outputs Available
G2-Series-GP
Depuis
C$
1 190.54
Modèles en stock
L'aperçu du produit
- Accuracy ± 1 %
- Approvals CE
- Battery Size and Type Alkaline AAA
- Calibration Note Gallons Per Minute (Gallons Default)
- Certifications NIST Traceable Calibration
- Display Type LCD
- Enclosure Ratings IP65, NEMA Type 4
- Materials, Wetted 316 Stainless Steel, Alumina Ceramic, Aluminum, PVDF, Tungsten Carbide
- Media Compatibility Liquids
- Operating Pressure, Max 1500 psi
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -18 °C
- Output Signal Current
- Process Connection Type NPT Female
- Repeatability ±0.1%
- Volumetric Flow Rate, Min 5 GPM
Turbine Meters with microprocessor-based electronics offers a durable, compact, high-precision fluid measurement device, with total and rate indication. Information is clearly displayed on a large 6-digit liquid crystal display with only 2-point floating decimal for totals from 0.01 to 999,999. All operations are easily performed with only 2 buttons.
The basic unit and display are powered by 2 AAA batteries, providing up to 2 years of use. Cumulative total, batch total, and rate of flow are standard. A single-point field calibration curve can be stored in memory.
Accuracy
G2SO5: ± 2% rdg
G2SO7, G2S10: ± 1.5% rdg
G2S15, G2S20: ± 1.0% rdg
Repeatability: ± 0.1%
Pressure Rating: 1500 psig (103 bar)
Temperature Range: -10° to 60°C (14 to 140°F)
Viscosity: Rated accuracy for fluids with viscosity of water (1 cSt); meters with display can be used for fluids up to 100 cSt with field calibration
Wetted Components:
Housing: 316 SS
Journal Bearings:Ceramic (96% alumina)
Shaft: Tungsten carbide
Rotor and Supports: PVDF
Retaining Rings: 316 SS
Outputs:
G2SXXNQ9GMX: None
G2SXXNP9GMX:Pulse
G2SXXN42GMX: 4-20 mA & Pulse
Display: 6-Digit LCD indicates flow rate, batch and cumulative total
Battery Life: 2 years
PDF et manuels
Afficher les notes et les avis
Does this come with calibration paper work?
Thank you for your inquiry. Unfortunately, only a CAL-1, which is a Certificate of Conformance, is available.
Date published: 2024-01-13
Hi, Can we install turbine flow meter in vertical line? What is the preferred installation position vertical/horizontal and why ?
Thank you for your inquiry. Ideally, we prefer to have the flow meter installed in a horizontal pipe, yet, you may have placed in a vertical position. The key is to have the flow direction go from floor to ceiling, not the opposite, to ensure a full flow in the pipe.
Date published: 2024-03-05