HTS-HANI-TANK-M

HANI Temperature Sensor for Metal Tanks

(0)

Modèles en stock

Non-invasive temperature measurement
Mounts to outside of tank, measures fluid inside of tank
Accuracy comparable to an invasive sensor, ±0.5°C
Designed for tanks 2 feet in diameter or larger

Voir l'aperçu du produit

HTS-HANI-TANK-M

Depuis ^C$ 1 155.67

Modèles en stock

Modèles de boutique

1 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Accuracy ± 0.5 °C (± 0.9 °F)
Accuracy Note ± 0.5°C (± 0.9°F) (stainless steel); ± 1.0°C (± 1.8°F) (other metals)
Applications Chemicals, Clean Water and Purified Solutions, Fluid Measurement and Control, Food and Beverage, Fuel and Gas, General Purpose, Industrial and Manufacturing, Oils, Pharmaceutical, Waste Management
Base Mounting Metal Tank
Electrical Connection M12 8 pin Female
Enclosure Ratings IP65
Height 1.72 in
Length 2.6 in
Loop Resistance (Vsupply -8V)/0.24 A
Materials Nylon, Silicone, Brass, Stainless Steel
Media Compatibility Water, Water-based fluids
Mounting Bolt-On
Operating Temperature, Max 40 °C
Operating Temperature, Min 0 °C
Output Detail 4 to 20 mA User scalable analog output, default scaling 0-100°C
Process Temperature, Max 100 °C
Process Temperature, Min 0 °C
Response Time t63: 5 sec ; t90: 10 sec
Supply Power Note 8 VDC - 28 VDC (loop powered)
Supply Voltage 8 to 28 Vdc
Tank Diameter less than 2 ft
Width 4.38 in

Non-Invasive Operation

No penetration, no risk of contamination

The HANI™ Tank Sensor never comes into contact with the process media inside of the tank. There is no risk of buildup, sensor wear or breakage from agitators, mixers, or corrosive abrasive liquids.

High Accuracy & Fast Response Times

Performs like an invasive sensor.

Omega’s patent pending Hybrid Temperature Sensing platform uses multiple sensors and a proprietary algorithm to achieve the same accuracy and fast response times as state-of-the-art invasive sensors without the cost and risk.

Accuracy for metal tanks with fluid flowing:

Stainless Steel:± 0.9℉ (± 0.5 °C)
Other Metals:± 1.8℉ (± 1.0 °C)

Ease of Installation

• No drilling
• No cutting
• No downtime

Omega’s innovative design makes sensor installation easy. Unlike invasive sensors, HANI™ Tank Sensor mounts to the outside of a metal tank and reads the temperature of the process media inside of the tank.

Works on most tank sizes and materials

The HANI™ Tank Sensor is designed for use on any metal tank 2 feet in diameter or larger. It arrives factory set for stainless steel tank walls, with additional materials selectable through Omega’s free SYNC software.

Common Applications

New and retrofitting existing systems

Lower the total cost of ownership and reduce contamination risk without sacrificing performance by upgrading to a HANI™ Tank Sensor.

Verify existing invasive sensors

With accuracies comparable to most state-of-the-art invasive sensors, the HANI™ Tank Sensor can easily be placed next to an invasive sensor to verify the accuracy or determine the drift of the invasive sensor.