Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FSW-160-Series
Heavy Duty Paddle Flow Switch
Modèles en stock
- Multiple Quick-Change Paddles
- EPDM Seal
- Field Adjustable Set Points
- Direct Replacement for Most Paddle-Type Flow Switches
FSW-160-Series
Depuis
C$
289.16
Modèles en stock
L'aperçu du produit
- Accuracy ± 1 %
- Electrical Connection 1/2 in NPS female Conduit with Screw Terminal block
- Enclosure Ratings IP10, NEMA Type 1
- Hysteresis 10% at upper end of flow range, 30% at lower end of flow range (∆ Flow Rate to Activate/ Deactivate Switch)
- Linear Flow Rate, Max 0 ft/s
- Linear Flow Rate, Min 0 ft/s
- Material Construction Option N/A
- Materials Stainless Steel, Brass
- Media Compatibility Liquids
- Operating Pressure, Max 200 psi
- Operating Pressure Note Operating Pressure: 8.6 bar (125 psi) @ 21°C (70°F), 3.4 bar (50 psi) @ 100°C (212°F)
- Operating Temperature, Max 66 °C
- Operating Temperature, Min 0 °C
- Paddle Length 1.3 in
- Pipe Size, Max 0 in
- Pipe Size, Min 0 in
- Pressure Drop, Max 1 psi
- Process Connection Size 1 in
- Process Connection Type NPT Male
- Process Temperature, Max 121 °C
- Process Temperature, Min 0 °C
- Sensitivity 10% @ upper end of range; 30% @ lower end of range
- Supply Voltage 125 / 250 Vac
- Switch Rating 15 A
- Switch Rating Note 15 A, ½ hp at 125 or 250 Vac 0.5 A at 125 Vdc (tungsten lamp) 0.25 A @ 250 Vdc (tungsten lamp)
- Switch Type SPDT NO/NC, Selectable
The OMEGAâ„¢ FSW-160 is the newest heavy-duty line of flow switches. The switch is used to signal, start, or stop electronically operated equipment when flow or no-flow conditions occur.
Omega’s elastomeric sealing system is superior to the metal bellows that are subject to metal fatigue and corrosion. This seal system has been field-proven for over a decade. The FSW-160 can be used in pipes 1 inch and larger, with set-points as low as 4 GPM (15.2 LPM) to over 500 GPM (1893 LPM) in larger pipe sizes. The FSW160 uses a 15A SPDT micro switch that can control a 1/2 horsepower motor.
Specifications
Hysteresis (? Flow Rate to Activate/ Deactivate Switch)
10% at upper end of flow range
30% at lower end of flow range
Differential Pressure Drops Across Unit Under Normal Operating Conditions:
1 to 3" pipe, less than 1 psi
4 to 48" pipe, negligible
Working Line Pressure: 200 psig maximum [proof tested to 1200 psig at 21°C (70°F)]
Working Temperature: 121°C (250°F) maximum continuous
Wetted Materials:
Body and Lid: Brass
Shaft: 304 stainless steel
Paddle: 316 stainless steel
Seal: EPDM
Electrical Switch Characteristics SPDT 15 A, 1/2 hp at 125 or 250 Vac 0.5 A at 125 Vdc (tungsten lamp) 0.25 A @ 250 Vdc (tungsten lamp)
Omega’s elastomeric sealing system is superior to the metal bellows that are subject to metal fatigue and corrosion. This seal system has been field-proven for over a decade. The FSW-160 can be used in pipes 1 inch and larger, with set-points as low as 4 GPM (15.2 LPM) to over 500 GPM (1893 LPM) in larger pipe sizes. The FSW160 uses a 15A SPDT micro switch that can control a 1/2 horsepower motor.
Specifications
Hysteresis (? Flow Rate to Activate/ Deactivate Switch)
10% at upper end of flow range
30% at lower end of flow range
Differential Pressure Drops Across Unit Under Normal Operating Conditions:
1 to 3" pipe, less than 1 psi
4 to 48" pipe, negligible
Working Line Pressure: 200 psig maximum [proof tested to 1200 psig at 21°C (70°F)]
Working Temperature: 121°C (250°F) maximum continuous
Wetted Materials:
Body and Lid: Brass
Shaft: 304 stainless steel
Paddle: 316 stainless steel
Seal: EPDM
Electrical Switch Characteristics SPDT 15 A, 1/2 hp at 125 or 250 Vac 0.5 A at 125 Vdc (tungsten lamp) 0.25 A @ 250 Vdc (tungsten lamp)
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Kareen from
Perfect!
Exactly as advertised and quick to ship! Our end user gave it 5 stars.
Date published: 2024-02-13