Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OS-HFV50-3001-H1
300:1 FOV, 600°C to 1600°C, Fixed IR Sensor with Display
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$1,434.13 |
| 5-9 | C$1,362.42 |
| 10-24 | C$1,333.74 |
| 25-49 | C$1,276.38 |
| 50-99 | C$1,247.69 |
| 100+ | C$1,219.01 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Additional Features 1 | Simultaneous analog and digital outputs |
| Cable Length | 3 m |
| Cable Length Note | 3 m (standard, 4-cores), 5 m/10 m |
| Current Draw | 100 mA |
| Data Interface | USB |
| Emissivity Note | 0.100 to 1.000, in 0.001 increments |
| Emissivity, Max | 1 |
| Emissivity, Min | 0.1 |
| Enclosure Ratings | IP64 |
| Field of view | 300:1 |
| Intrisically Safe | No |
| Loop Resistance, Max | 500 Ω |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | 0 °C |
| Output Signal | Current |
| Process Temperature, Max | 1600 °C |
| Process Temperature, Min | 600 °C |
| Relative Humidity Note | 10 to 95%, non-condensing |
| Relative Humidity, Max | 95% |
| Relative Humidity, Min | 10% |
| Repeatability | ± 0.3% of reading +1°C |
| Response Time | 5 ms |
| Response Time Note | 5 ms ((95% signal)) |
| Sensor Diameter | 59.5 mm |
| Sensor Length | 110 mm |
| Spectral Response, Max | 1 μm |
| Statistics | Average, Peak Hold, Valley Hold |
| Storage Temperature, Max | 80 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 24 VDC ± 20% |
| Supply Voltage | 24 Vdc |
| Temperature Resolution | 0.1 °C |
| Weight | 500 g |
| Weight Note | 500g (without cable) |
| Voir toutes Spécs | |
PDF et manuels
Logiciels et pilotes
Afficher les notes et les avis
Rated 4 out of
5
by
JMcIntyre from
Good device, bad documentation
The product works well, but the operator's manual contains a MAJOR error in the section on how to set up the sensor. The manual says to enter setup mode by pressing and holding both buttons. However, pressing and holding down, then pressing up resets the sensor, erasing all settings. Setup must be entered by pressing and holding up, then pressing down. This is not explained in the manual. It took 6 calls to Omega over two days to even explain to a tech support person what the error was. I hope that it will be corrected in future documentation.
Date published: 2021-02-09