Skip to search Skip to main content Skip to navigation

Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
  1. Domicile
  2. Voir Mesure de force et de contrainte
  3. Voir Indicateurs de contrainte
  4. Voir High Speed Load/Strain Meters and Process/Voltmeters
  5. DP7600-S2
Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.
Reste ici.
Allez au site >

DP7600-S2

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available

0,0
(0)
High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available
Cliquez et maintenez pour zoomer
Voir toutes les modèles Voir tous les accessoires

C$1,843.70

Article# DP7600-S2

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-9 C$1,843.70
10-24 C$1,751.52
25-49 C$1,659.33
50-99 C$1,567.15
100-499 C$1,474.96
500+ C$1,382.78

En stock

Délai de livraison (si pas en stock): 30 semaines
Ajouter à la liste des projets
Voir Les Spécifications

Spécifications du produit

<< Voir toutes les modèles de produits
Brand
Accuracy ± 0.01 %
Accuracy Note ± 0.01% of reading ± 1 count of A/D @ 25°C (77°F)
Bridge Resistance 100 to 5000 Ω
Bridge Resistance Note 100 to 5000 Ω; 4-wire or 6-wire configuration
Calibration Note Shunt calibration capability with span programmable from front panel; no potentiometer adjustments; access code prevents unauthorized calibration switches
Channels One channel standard, second channel optional
Coarse Gain Setting Selectable by rear switches
Control Output N/A
Convert/Hold Input Normally high; if pulled low, holds display
Cutout Dimensions 2.45 x 5.06 in
Data Interface RS232
Data Interface Note ASCII RS232 compatible, 300V isolation to system ground
Digital Filter Programmable Cutoff Frequency
Display Note -32768 to 32767 with programmable decimal points; 14 mm (0.56") red LED
Display Type LED
Electrical Connection Screw Terminal
Electrical Output N/A
Form factor 1/8 DIN
Height 2.7 in
Input Analog Filter 4-pole active anti-alias; 500 Hz cutoff on single-channel unit and 250 Hz cutoff on dual-channel unit
Input Bias Current ± 50 nA maximum ± 100 pA/°C (per input channel)
Input Configuration Front Keypad
Input Type Strain
Internal Resolution 16 bit
Length 6.9 in
Materials Stainless Steel
Measurement Type Current, Strain, Voltage
Mounting Panel
Number of Digits 5
Number of Inputs 1
Operating Temperature, Max 60 °C
Operating Temperature, Min -20 °C
Output Method RJ11 jack for serial interface
Output Signal N/A
Peak Detection Updated at rate selected by digital filter, peak stored in memoryrogrammed to give limit #1 output up to 100 seconds after a programmed limit is reached. This output can be used to reset the peak reading by tying limit #1 output to remote input
Power Consumption 8 W
Range Selection Selectable by dip switch on rear of unit
Range Selection Note 5.1, 10.2, 15.3, 20.0, 26.3, 30.6, 35.1, 39.2 (in mV)
Reading Rate Limited to 1000/s divided by number of channels
Remote Inputs Display Peak, Display Runout, Reading, Reset Peak, Runout Reading, Tare
Resolution 16-bit A/D
Rollover Error ± 2 counts of A/D @ 25°C (77°F)
Runout Mode Updated at rate selected by digital filter. Runout is normally stored in memory and recalled via front-panel switch, over the serial interface, or by selecting runout display mode on rear connector.
Sampling Rate 1000 Hz
Sensor Excitation ± 15 Vdc, ± 5 Vdc @ ± 50 mA
SetPoint Outputs 4 isolated open collector transistor outputs rated 30 Vdc maximum; will sink up to 50 mA; 300 V isolation between limit outputs and system ground; limit #1 can be programmed to be delayed from 1 to 100 seconds
Settable Parameters Digital Filter, Limits, Offset, Span
Supply Power Type AC
Supply Voltage 115 Vac
Weight 370 g
Width 5.18 in
Voir toutes Spécs Montrer moins
High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available DP7600-S2 DP7600-S2
0,0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 4ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
fr-CA
fr
Enregistrer la configuration