Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
MDSSI8-RTD-EIT-AL
Benchtop Digital iSeries Thermometers Ten-Channel Models
Choisissez une variante
Input Type
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$1,320.00 |
| 5-9 | C$1,254.00 |
| 10-24 | C$1,188.00 |
| 25-49 | C$1,122.00 |
| 50-99 | C$1,056.00 |
| 100+ | C$990.00 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| A/D Conversion | Dual slope |
| Accuracy | ± 0.4 °C |
| Accuracy Note | RTD (Pt, 0.00385, 100, 500, 1000 Ω) : 0.4°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : 0.4°C |
| Additional Features 1 | Benchtop Enclosure |
| Common Mode Rejection | 120 dB |
| Control Output | 2 SPDT Relay |
| Current Measurement Range | 0 to 20 mA |
| Data Interface | RS232, RS422, RS485 |
| Data Interface Note | RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS485: Addressable from 0 to 199 |
| Decimal Selection | 0, 0,001, 0,01, 0,1 |
| Digital Filter | Programmable |
| Display Color | Red, Green, Amber |
| Display Size | 10.2 mm (0.40 in) |
| Display Type | 4 Digit, 9 Segment LED |
| Display Type Note | 4-digit, 9-segment LED, 10.2 mm (0.40") i32, i16, i16D, i8DV: 21 mm (0.83") i8: 10.2 mm (0.40") and 21 mm (0.83"), i8DH—GREEN, AMBER, and RED programmable colors for process variable, setpoint and temperatureunits |
| Electrical Connection | Sub-D Female Miniature Connector |
| Electrical Connection Note | DB-9 connector on rear panel; optional alarm 1 and 2 (programmable) |
| Form factor | 1/8 DIN |
| Frequency | 50 to 60 Hz |
| Impedance Input | 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc |
| Input Configuration | Single-ended |
| Input Type | RTD |
| Normal Mode Rejection | 60 dB |
| Number of Inputs | 1 |
| Offset Adjustment | -1999 to +9999 |
| Output Detail | Optional Alarm 1 and 2 (Programmable) Type: Form “C” SPDT relays Operation: High/low, above/below, (limited output to 30 Vrms only) band, latch/unlatch, normally open/normally closed and process/deviation; front panel configurations Optional Analog Output (Programmable): Non-isolated, retransmission 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only). Accuracy is ± 1% of FS when following conditions are satisfied. 1) Input is not scaled below 1% of input FS 2) Analog output is not scaled below 3% of output FS ; |
| Polarity | Unipolar |
| Reading Rate | 3 samples/sec |
| Resolution | 1°/0.1°; 10 µV process |
| Set Point Adjustment | -1999 to 9999 counts |
| Span Adjustment | 0.001 to 9999 counts, programmable |
| Step Response | 0.7 sec for 99.9% |
| Supply Voltage | 90 to 240 Vac |
| Temperature Measurement Range | RTD (Pt, 0.00385, 100, 500, 1000 Ω) : -200 to 900°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : -200 to 850°C |
| Temperature Stability | 0.04°C/°C |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis