Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
S-HEATER
Iron or Chrome Steel Strip Heater Opposite End Terminals
Modèles en stock
- 1½" Wide
- Rugged, Reliable, Premium Quality
- 150 to 2250 Watt
- U.L. Component Recognized and C.S.A. Certified
S-HEATER
Depuis
C$
126.17
Modèles en stock
L'aperçu du produit
- Form factor Strip
- Height 0 in
- Number of Mounting Channels 2
- Termination 1 Terminal On Each End
OMEGALUX™ "S" series strip heaters are supplied with either a rust-resisting iron or chrome steel sheath to a width of 1½". Selecting the sheath material depends upon the process and environment that the heaters would be exposed to. The "S" series features one terminal on each end conforming in many applications. See Introduction Pages for additional strip heater application guidelines.
CAUTION AND WARNING
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
/* Designate voltage, i.e.; insert 120 or 240 for voltage. Additional strip heater models available with other widths and configurations. Contact OMEGALUX 1-800-USA-HEAT.
To determine maximum allowable watt density, see Figures C-8 or C-9.
Not all combinations may be vaild in th "Part Number Builder".
Please review the spec sheet for all possible valid part numbers.
CAUTION AND WARNING
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
| Dimensions—Inches (cm) | Rust-Resisting Iron Sheath | Chrome Steel Sheath | |||||||
| A | B | D | Watts | W/in2 | Model No. | Watts | W/in2 | Model No. | Wt. Lb (kg) |
| 8 (20) | 7 (18) | 6 1/2 (17) | 150 | 10 | S-815/* | 250 | 17 | S-802/* | .63 (.16) |
| 9 1/2 (24) | 8 1/2 (22) | 8 (20) | 200 | 10 | S-920/* | 300 | 15 | S-903/* | .75 (.34) |
| 12 (30) | 11 (28) | 10 1/2 (27) | 250 | 9 | S-1225/* | 250 | 9 | S-1202/* | .94 (.43) |
| 12 (30) | 11 (28 | 10 1/2 (27) | — | — | — | 500 | 17 | S-1205/* | .94 (.43) |
| 14 (36) | 13 (33) | 12 1/2 (32) | 300 | 8 | S-1430/* | 500 | 14 | S-1405/* | 1.06 (.48) |
| 15 1/4 (39) | 14 1/4 (36) | 13 3/4 (35) | 325 | 8 | S-1532/* | 500 | 12 | S-1505/* | 1.19 (.54) |
| 17 7/8 (45) | 16 7/8 (43) | 16 3/8 (42) | 375 | 8 | S-1837/* | 500 | 10 | S-1805/* | 1.44 (.65) |
| 17 7/8 (45) | 16 7/8 (43) | 16 3/8 (42) | 500 | 10 | S-1850/* | 750 | 15 | S-1807/* | 1.44 (.65) |
| 17 7/8 (45) | 16 7/8 (43) | 16 3/8 (42) | — | — | — | 1000 | 20 | S-1801/* | 1.44 (.65) |
| 19 1/2 (50) | 18 1/2 (47) | 18 (46) | 500 | 9 | S-1950/* | 500 | 9 | S-1905/* | 1.5 (.68) |
| 19 1/2 (50) | 18 1/2 (47) | 18 (46) | — | — | — | 750 | 13 | S-1907/* | 1.57 (.71) |
| 19 1/2 (50) | 18 1/2 (47) | 18 (46) | — | — | — | 1000 | 18 | S-1901/* | 1.57 (.71) |
| 21 (53) | 20 (51) | 19 1/2 (50) | 500 | 8 | S-2050/* | 500 | 9 | S-2005/* | 1.75 (.79) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | 250 | 4 | S-2425/* | 500 | 7 | S-2405/* | 1.88 (.85) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | 500 | 7 | S-2450/* | 750 | 10 | S-2407/* | 1.88 (.85) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | — | — | — | 1000 | 14 | S-2401/* | 1.88 (.85) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | — | — | — | 1500 | 21 | S-2415/* | 1.88 (.85) |
| 25 1/2 (65) | 24 1/2 (62) | 24 (61) | 750 | 10 | S-2575/* | 1000 | 12 | S-2501/* | 2.01 (.91) |
| 26 3/4 (68) | 25 3/4 (65) | 25 1/4 (64) | 700 | 8 | S-2670/* | 750 | 9 | S-2607/* | 2.13 (.97) |
| 30 1/2 (77) | 29 3/8 (75) | 28 (71) | 750 | 8 | S-3075/* | 750 | 8 | S-3007/* | 2.13 (.97) |
| 33 1/2 (85) | 32 3/8 (82) | 31 (79) | 750 | 7 | S-3375/* | 1000 | 10 | S-3301/* | 2.63 (1.2) |
| 35 7/8 (91) | 34 3/4 (88) | 33 3/8 (85) | 1000 | 7 | S-3610/* | 1000 | 9 | S-3601/* | 2.83 (1.3) |
| 38 1/2 (98) | 37 3/8 (95) | 36 (91) | 1000 | 8 | S-3810/* | 1000 | 8 | S-3801/* | 3.0 (1.4) |
| 42 1/2 (108) | 41 3/8 (105) | 40 (102) | 1250 | 9 | S-4312/* | 1000 | 11 | S-4301/* | 3.38 (1.5) |
To determine maximum allowable watt density, see Figures C-8 or C-9.
Not all combinations may be vaild in th "Part Number Builder".
Please review the spec sheet for all possible valid part numbers.
PDF et manuels
Afficher les notes et les avis
Hi, If I buy a s-920/120V strip heater, is there any installation clearance instruction for this heater, I am trying to mount it inside of a NEMA 4x enclosure
Included will be an instruction sheet for installing the Heater purchased. Also to ensure you specify the parameters correctly you can use the resource section from the Omega Website to select the Strip Heater parameters best matching your application.
Date published: 2020-04-24
RoHS 2015/863 - Voir le certificat
Approuvé CE
Composant certifié UL
CSA