Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FTB4810
Low Flow Liquid Flowmeters

Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produitsBrand |
![]() |
Accuracy | ± 1 % |
Approvals | CE |
Cable Length | 5.5 m |
Cable Length Note | 610 m |
Electrical Output | Amplified Square Wave |
Height | 2 in |
K-Factor | 220 pulses/gal |
Length | 5 in |
Materials, Wetted | 316 Stainless Steel, FKM, PVDF, Ruby, TFE, Tungsten Carbide |
Media Compatibility | Liquids |
Operating Pressure, Max | 500 psi |
Operating Temperature, Max | 93 °C |
Output Detail | Maximum Current: 20 mA |
Output Signal | DC Pulse |
Pressure Drop, Max | 15 psi |
Process Connection Size | 1 in |
Process Connection Type | NPT Female |
Supply Voltage | 6 to 24 Vdc |
Volumetric Flow Rate, Max | 25 GPM |
Volumetric Flow Rate, Min | 0.5 GPM |
Width | 2 in |
Wire Gauge | 22 AWG |
Voir toutes Spécs |
PDF et manuels
Afficher les notes et les avis
Rated 2 out of
5
by
Frustrated in Texas from
Good value product but customer service was a mess
Product is good bang for the buck, delivery lead time was horrible with multiple missed delivery promises. Turns out if you buy more than one (2 in my case) don't request them to be shipped complete (shipped together to save freight). Omega told me that if they received one it would not be held to fill my order. Instead the one would be shipped to someone who only bought one. my oder wouldn't be filled until they received two at the same time
Date published: 2024-08-01
Rated 4 out of
5
by
dordtEGR from
Works great - with pull-up resistor
works great down to 0.2 gpm. Requires a pull-up resistor for the pulses. Fortunately, I had seen the technical description of the similar FTB-4607 because the 4707 manual made no mention of it. Powering from a +5V signal directly from my DAQ, and works just fine.
Date published: 2017-10-26